Mmakshak,
The skating force has nothing to do with the diameter of the record. It has to do with the fact that the drag of the stylus in the groove is pulling backwards along a line tangent to the groove (along the same line as the cantilever), but that is not the same line as from the stylus to the pivot because of the offset angle of the cartridge. If you did a vector analysis, you would see that there is a vector component that is inward. If there is somehow greater drag toward the inner groove, then yes, there should also be a bigger vector component of antiskating. I just don't see a reason to expect appreciably greater drag at the inner grooves.
Greater distortion in the inner groove is most likely the product of the physical compression of the waveform, described by the groove, into a smaller space. This is why some early proposals for records had the stylus playing from the inside out. Because music typically has its peak volume (climax) at the end of the piece, it made sense to put those wide swinging grooves at the outside diameter where they would not be so compressed into a smaller space.
The skating force has nothing to do with the diameter of the record. It has to do with the fact that the drag of the stylus in the groove is pulling backwards along a line tangent to the groove (along the same line as the cantilever), but that is not the same line as from the stylus to the pivot because of the offset angle of the cartridge. If you did a vector analysis, you would see that there is a vector component that is inward. If there is somehow greater drag toward the inner groove, then yes, there should also be a bigger vector component of antiskating. I just don't see a reason to expect appreciably greater drag at the inner grooves.
Greater distortion in the inner groove is most likely the product of the physical compression of the waveform, described by the groove, into a smaller space. This is why some early proposals for records had the stylus playing from the inside out. Because music typically has its peak volume (climax) at the end of the piece, it made sense to put those wide swinging grooves at the outside diameter where they would not be so compressed into a smaller space.