2. cables
  3. 1006371528

Back with some more cables

My traveling plans got delayed for another week, so I ordered a few more cables to audition, to keep me busy in the meantime.
Today I received the Synergistic Research Designer's Reference interconnect cables with active shielding and I put it up against the Valhalla. Its a nice looking cable with a little blue toy light, which comes on when the cable is hooked up to the active shielding, to make it more fancy looking, if you know what I mean.

To make a long story short:
Yes, the active shielding improves the sound when compared to the cable not hooked up to the shielding.
The bass performed with more authority, the midrange opened up and the top octaves had a nice and clear sound to it.
But again, the Valhalla is the better cable. Its more musical, a better defined bass and the clarity and richness of sound is just amazing. When I listen to the Valhalla in A-B with the Designer's reference, I feel that the Valhalla sounds just *right* That is how I want a cable to perform. Everything seems almost perfect in place and I can fully concentrate on the music, whereas with the Synergistic research, you just do not have that feeling that everything is *in order* Here a little issue, there a little issue, I hope you know what I mean.
Pricewise the Synergistic Designer reference cable is in the same league, both interconnects can be bought at around $2000, so in my system, I would not go withe the Synergistic cable.
I was not able to get the squared Designer's Reference cable, but it is twice the price, so I can only hope, that this cable will be twice as good as the Valhalla, which I seriously doubt. Not even the Siltech Compass Lake is twice as good as the Valhalla and for the price of a squared Designer's reference, you can almost buy a pair of the Siltech, when we talk street prices here.

I will also get the XLO Limited and just for the fun of it, a pair of the Van den Hul The First Ultimate.
I keep you posted
tekunda
jtinn
1,123 posts
 
As usual, nicely done!
bob_bundus
1,834 posts
 
Tek what power source are you using for your active shielding power supply? If it's the little wallwart power pack then you're not realizing all the potential of your Designers Reference. If it's the Master Control Center then that's an improvement, but again that depends upon which AC cord you have supplying power into the MCC.
I tried all of Synergistic's AC cords with my MCC (I did not expect to hear any difference no matter what AC cord was used) & came to the same conclusion as the manufacturer, that their best AC cord makes their active shileding system sound the best, dramatically better in fact. Econmically speaking, this combo adds another $2400 already (it can be had for considerably less if you look around) for the MCC with a Designers Reference Squared AC. For just one pair of interconnects this makes no economic sense. But if you have all active-shielded interconnects like mine, then the cost of the MCC divides by the # pairs of interconnects it is supplying. Additionally the MCC has two different bias levels available, 30VDC & 15VDC. You can experiment with the different DC voltages to different cables & pick the better per each application. These differences aren't dramatic, but they are still worthwhile optimizing.
"Synergy" of cables with your components is of course another issue, & what works best for me won't necessarily work best for you, vice-versa, etc.
The results of your experiments are interesting & please do post your further learnings here. I am particularly interested in the Van den hul. However unless I misunderstand you, I don't believe you've yet heard the full capabilities of the Synergistic system.
tekunda OP
127 posts
 
Bob, that's Synergistic's fault then. If it is true that the MCC makes such a big difference, then why does Synergistic not stay awy from these little wall warts, which does not show the whole potential.
Imagine, is this was true, then the chances are the Synergistic is loosing customers who will never discover the real potential.
But what about the price factor here also?
Two pairs of the squared interconnects with MCC are a lot more than the Valhalla and even if the MCC will make a difference, I doubt that the cable will beat the Valhalla. So the Valhalla would be the better buy for the money, I guess. Have you done an A-B with Synergistic and the MCC and the Valhalla?
More to discover