2. speakers
  3. 124162-79898

Buying Without Audition

Surely I'm not the only one with the dilemma of living out in the boonies with no audio equipment dealer (other than Walmart) within 100+ miles.  How does one choose among the many speakers offered in any given price range without listening to them before buying?  The reviews are often skewed by self interest and, in any event, what you hear and what you like is completely subjective and the prosaic descriptions in the reviews mean different thing to different people.  After all, you really can't accurately describe in words what someone else might hear. The problem is compounded if you wish to buy "used" from a private party as there often is no right of return, and when there is, the cost of shipping both ways is a significant consideration, especially when looking for floor speakers.

Any educated suggestions?
larstusor
facten
931 posts
 
If I waited to listen to speakers in friends' homes I'd be dead 10 times over. Whenever I talk to freinds or people I work with about equipment they look at me like I have 10 heads; or ask me, questions like " hey what do you know about SONOS?". MHO, you can make it work without auditioning and not have to settle, nor have it be an excrutiating expereince
dentdog's avatar
dentdog
300 posts
 
I bought my whole system piece by piece without auditions. BUT I did study for about a year all things audio, primarily on this site. I began to gravitate towards time aligned, crossoverless, high efficiency speakers and balanced fully differential  electronics throughout. It paid off in spades. 
Just decided if I was going to spend that  much money I wanted to learn how things worked. 
Ag insider logo xs@2x
gdnrbob
2,421 posts
 
I guess I am ’old school’ now.
The internet has opened things up for audiophiles. ’Back in the olden’ days’, you had to visit shops and spend hours listening (which was fun), now you can review the experiences of others and make an educated guess when buying stereo equipment.
What I really wanted to impress upon the OP is that by auditioning equipment, you get a real feel for what sound ’good’ to you and you alone. Sure, you can get a decent sound system by using the reviews of others, but my opinion is that you really need to experience what ’sound’ makes you close your eyes and experience the ’Nirvana’ that comes when a stereo system comes together. (Of course, you’ll always be tweaking it....;) )
Bob
Ag insider logo xs@2x
michaeljbrown
145 posts
 
I didn't know there were so many fellow boony-dwellers in Audiogon! Everything in my listening room was purchased used on Audiogon or other sites, except for my Vinyl Nirvana Thorens long base 125, which I got from Dave himself, along the tonearm and cartridge. I have been doing that since I started, and it's been fun. I have bought my first set of  Thiel 2.2's from a store in Lubbock, the others from Don Hamby in Amarillo, all used. I have become willing to meet people half way, from the metroplex or Houston. I have swapped speakers and amps after eating barbeque in Brady, TX. I bought a pair of (huge) Thiel CS5's from a seller in Alabama, and used Craters and Freighters to pack and ship them to my garage, luckily without incident. Go for it. It's all fun.

volsfan846
14 posts
 
If you buy speakers that have a VERY flat frequency response, good quality drivers, good cross over design in a nice cabinet, you can get away without an audition. Mine are 34 - 20k hz +/- 1.5 db and 29 - 45k +/- 3 db. 

Hard to go wrong if the response curve is that flat. Wish they were a tad more efficient, but getting the power wasn't that expensive. 

I wouldn't hesitate to buy anything from Jim Salk or Dennis Murphy without ever plugging a wire into them. 
More to discover