bypass outlet and hook wires directly to romex??

Hi Stehno, Glad we cleared that up. When I talk about good power cords, I usually speak of those which retail for more each than the cost of three Foundation Research LC1/LC2 conditioners so forgive me if I get defensive when I read claim that only SOME aftermarket power cords are better than zip cord - because I have personally never tried one which wasn't better.

A single run of Romex from pannel to component will not minimize RF unless it is twisted 180 degrees every 5 to 10 feet the full length of the run. 10AWG Romex sounds the best and a step further would be to bypass the pannel completely and install a fuse block with a ceramic fuse.
The Romex is then terminated with a male IEC connector (Wattagate (Marinco) accepts 10AWG conductors) and connects to the component itself.

While this is a minimalist approach and does a good job of limiting the number of breaks in current it isn't all that fantastic sounding.

Plugging a simple 5Kva Topaz Ferroresonant power conditioner in to the wall receptical and connecting the amp, preamp and another stand alone isolation transformer in to it (plug your digital in to the isolation transformer) will produce better sonic results and cost under $150 if you get the conditioner/transformer on ebay.

Bwhite, I perceive thou art pretentious and self-elevated. At least that part appears clear. And perhaps that you had a philosophy 101 course.

I find it funny how your power cords are ranging in the $2k plus price range and yet you are performing all these tests with the zip cord you purchased from Home Depot (doesn't make sense unless you're displeased with your power cords performance). But for the sake of this thread you now pretend that it is I who performed the expirments. This is silly and should be a waste of your time and mine.

Although I've not tried any power cords retailing at the $2k plus range, I have no problem assuming there to be some to many even at that price break and beyond that probably offer no sonic improvements over the zip cord that you purchased at Home Depot for your expirments.

For the same reason one could spend $30,000 on an amplifier that may offer no sonic improvements, and may in fact sound worse than a $995 amplifier. I'm sure you would agree with this.

Based on what you claim to have spent on your system, you more than most, by now should realize that this hobby usually requires one to spend a lot of money to realize one does not need to spend a lot of money.

And, yes at this point, I'm having great difficulty believing that you have actually tried running romex straight from the service panel to a male IEC connector which plugs into the component(s).

Per your request, I forgive you.

Stehno... Sorry you took what I said as being pretentious and self elevated. I will accept your comment and bow my head to you with sincerity - I feel bad about coming across that way (understand that I may have) and do not wish to argue further.

A point I would like to make is that most people (including myself) do not jump directly into a 2000+ power cord without trying MANY less expensive solutions first. I have experimented to the point where the cost of my failed experiments actually rivals the price of my power cords. So what's better, to blow a bunch of cash (which can never be reclaimed) on projects that really aren't terribly successful or to just look the other way while paying WAY TOO MUCH for something that works better?

It isn't much different than buying a pair of speakers that sound worse and cost less because we want to save money. Only to find ourselves upgrading - selling at a loss and spending even more money to eventually get what we should have purchased in the first place. It's the audiophile trap I guess...

I wish I had someone who provided me guidance, suggestions or oppinions before I embarked upon my past experiments because it could have saved me lots of anguish.

Fortunately, today we have Audiogon - a means for people to communicate and learn from the mistakes and experience of others. This is a very valuable tool.

Stehno, great observation! I came to that conclusion years ago - about not having to spend a bundle, just spend enough in the right places. I have found that all systems have their limitations and that getting perfect 20Hz bass is one of the most expensive roads to go down. I just accepted that for my needs/budget I could get very good bass down to 40Hz and really excellent performance everywhere else for a fraction of the cost. BTW, I rarely listen to Saint Saens Organ Sym. #3 anyway.

Thanks, Twl. I'm sorry Bwhite, but I couldn't help but feel I was now put into the position of defending Home Depot's zip cord of which I've never dabbled with in my system. So I got a bit defensive and lashed out a bit. Please accept my apologies also.

Twl, that great observation came from a very knowledgeable friend and probably saved me quite a bit of frustration and money.

But it certainly did not take me long to believe that observation.

Twl, may I ask what you've done to try reproducing the bottom-end?