I have not had any problems with my SACDs, but if the disk is off balance, it shouldn't matter what type of disk it is.
I received a demo DVD from B&W. It made my whole cabinet shake the player was vibrating so much. I read in an online forum that other people had that problem with that demo disk. I contacted B&W and they sent me another. No vibration.
What Wahoo_Envy describes as the CD vibrating on the first few tracks and then vibrating less as the disk is playing I believe is due to the fact that the laser tracks from the inside out. As the laser moves toward the outside edge of the disk, the disk spins slower. Thus less vibration.
I also tried updating my firmware and re-initialized my player. That did not make any significant difference as far as vibration with the problematic disks.
I received a demo DVD from B&W. It made my whole cabinet shake the player was vibrating so much. I read in an online forum that other people had that problem with that demo disk. I contacted B&W and they sent me another. No vibration.
What Wahoo_Envy describes as the CD vibrating on the first few tracks and then vibrating less as the disk is playing I believe is due to the fact that the laser tracks from the inside out. As the laser moves toward the outside edge of the disk, the disk spins slower. Thus less vibration.
I also tried updating my firmware and re-initialized my player. That did not make any significant difference as far as vibration with the problematic disks.