2. amps-preamps
  3. 130553-4358

DIY Pass Labs First Watt F5 amp impressions

I recently acquired a well- built DIY First Watt F5 amp for the cost of the parts, which is the understanding among those that build the designs that Nelson Pass has made available to the DIY folks.  I have been using a McCormack DNA .05 Deluxe amp and a Don Sachs 6NS7 tube amp to drive my Spatial Audio M4S Turbo S Hologram open-baffle speakers, which are ~94 db efficient.  I have raved about the McCormack amp on this forum, but swapping the F5 for the McCormack amp has been a  sheer revelation.  I have had dozens of tube and class A/B amps my system over the past 4 decades, as well as a couple of very good class D amps recently, but the tonal accuracy and 3-D representation of music with this F5 is simply stunning.  It is offers a glimpse into the inner details of the music.  I do not have the superlatives to describe the musical enjoyment of the addition  this amp provides to my system.  I am put off the heat his amp generates -- similar to that with a tube amp with a quad of KT88's, but it is a fair bargain for the most ruthlessly revealing sound reproduction I have ever heard in my system.  My regret is that I waited so long to have a Nelson Pass-designed amp in my system.  If your speakers are quite efficient, there are several variants in the First Watt line of amps that might be a great match for your system.  Mark at Reno Audio is the guy to help you sort out the best amp for your needs.
Cheers, Mark
whitestix
larryi
1,972 posts
 

I have not heard the F5, but, I have heard their J2 model in my system (a loan from a friend that I had for two weeks) and liked it very much.  It delivered the liveliness, expansive and enveloping soundstage and good low-level dynamics that is usually exclusive to tube gear, particularly, low-powered tube gear.  The only thing that was sort of "solid state" about the sound was the slightly hard edge to the initial attack of notes.  I also found the music to be engaging and held my interest in a way that I don't experience with other solid state amps (they somehow sound lifeless).  The J2's sound MUCH better, to me, than any Pass amps.

I have also heard a friend's DIY project amp that is a First Watt design.  I believe it is one of the SIT amps.  I heard it in his ultra high sensitivity system.  That amp, too, is a winner.

whitestix OP
386 posts
 
Larryi,
 Thanks for you keen observations.  I would agree that there is a slightly hard edge to the leading attack of notes with F5.  
whitestix OP
386 posts
 
I too await a report on the LTA amp from Kenny.  I seem to recall Julius Futterman might have been a early designer and user of this circuitry. 
gdhal's avatar
gdhal
1,641 posts
 
Pardon my seemingly confusion but genuine curiosity in this thread.

I’m assuming "DIY" is "do it yourself". However, when I check the first watt FAQ page http://www.firstwatt.com/faq.html there is a question specific to Do you really build them yourself? to which the response is Yes, until this last year, when my son Colin and nephew Sean began helping with assembly. I’m assuming that means Nelson himself is building the amp.

Can the OP or someone else please clarify if the first watt amps are something Nelson Pass or the end consumer is building? Thanks.
kdude66
1,198 posts
 
gdhal,

Both,the production versions of first watts and the "Diy" versions that Nelson gives his blessings to the Diy community.Different models were available as kits on the Diy audio website store.

I own a production version of the F7,and my Sit2 is a Diy version but differs from the production version in that mine is class a push pull and uses Nos Sony Vfet's that were made available in matched pairs,The pwr supply,case and the heat sinks are the same,It just doesn't say first watt on it.

I hope this clarifies your question.

I have heard all the first watts,except the F1,and I have owned the F3,J2,and the F7.I have built the F5 and the F5 turbo version from kits and my Sit2 "Diy" I bought used from audiogon.

Kenny.
More to discover