Infinity cs 3009

You won't find exact replacement parts to build a pair of these.  The pair that Erik recommended is excellent although there are a ton of lower cost alternatives.  If you are interested, let me know and I'll be happy to provide you some designs.  
Tim 

They are only expensive relative to other kits. The parts are very similar to those used in a $20k Sony speaker system. Compared to that, this kit is a bargain! :) 

Best,

E

Back in February 2017 I purchased the scan-speak b741 kit from Madisound. I substituted the single 4 ohm midrange for a pair of 8 ohm of same model. I inserted these into my Dunlavy sc-iv cabinets. I also removed the foam rubber and wiring and replaced with Supra 13 awg speaker wire and wool damping. The woofers and midrange needed spacer plates which I fabricated from round 1/16" steel plates. The tweeter just needed a new notch in the cabinet. I also changed out the Clarity Cap ESA 6.8 uF and 22 uF caps for Clarity Cap CMR's in the tweeter crossover. Since the crossovers are much larger than what they replaced I decided to mount them externally. I have a pair of F113's subs for the lower frequencies. The detail is just incredible. Listening volumes have gone way down. My listening choices have moved more into classical and jazz because of the improvement in hearing everything. My advice to royboy 11532 is if you have the skill level the Scan-speak b741 kit is a pretty good set-up.

Thanks to everyone for your input, it is much appreciated!

I would look for a pair of infinity kappa series speakers, they are a step up from the cs 3009 The kappa 8 and 9 will out perform any of those above mentioned kits with the right electronics, if you step up to the infinity Renaissance series speakers 80 or 90 especially the 90...look at the many rave reviews, they will literally destroy any of the above mentioned kits and you can put the money you saved into electronics, good luck.