Thf: The lamms are stable to a short, he actually tests all amps by shorting them out.. the safety cicuitry kicks in and then in a few seconds it plays music again..
There is a reason they are so expensive.. the build quality and the sound! These can drive the big apogee's!
http://www.lammindustries.com/PRODUCTS/m12spec.html
Lamm M1.2 specs
Pure Class A hybrid amplifier producing 110 Watts into 8 AND 4 Ohms,
400 Watts into 2 Ohms,
600 Watts into 1 Ohm (continuous).
Low impendence settting produces an amazing! Most other Class A amps roll to Class AB after 4ohm and lower..
110 Watts into 4 Ohms (Class A operation).
220 Watts into 2 Ohms (55 Watts Class A operation).
400 Watts into 1 Ohm (27.55 Watts Class A operation).
If you needed more the M2.2 in high impedance
220 Watts into 8 Ohms (41 Watts Class A operation).
440 Watts into 4 Ohms (20.5 Watts Class A operation).
700 Watts into 2 Ohms (10.25 Watts Class A operation).
900 Watts into 1 Ohm (5.125 Watts Class A operation).
or in Low Impedanc (flip of a switch on the back)
220 Watts into 4 Ohms (41 Watts Class A operation).
440 Watts into 2 Ohms (20.5 Watts Class A operation).
600 Watts into 1 Ohm (10.25 Watts Class A operation).
Based on the specs I would go with the M1.2's
There is a reason they are so expensive.. the build quality and the sound! These can drive the big apogee's!
http://www.lammindustries.com/PRODUCTS/m12spec.html
Lamm M1.2 specs
Pure Class A hybrid amplifier producing 110 Watts into 8 AND 4 Ohms,
400 Watts into 2 Ohms,
600 Watts into 1 Ohm (continuous).
Low impendence settting produces an amazing! Most other Class A amps roll to Class AB after 4ohm and lower..
110 Watts into 4 Ohms (Class A operation).
220 Watts into 2 Ohms (55 Watts Class A operation).
400 Watts into 1 Ohm (27.55 Watts Class A operation).
If you needed more the M2.2 in high impedance
220 Watts into 8 Ohms (41 Watts Class A operation).
440 Watts into 4 Ohms (20.5 Watts Class A operation).
700 Watts into 2 Ohms (10.25 Watts Class A operation).
900 Watts into 1 Ohm (5.125 Watts Class A operation).
or in Low Impedanc (flip of a switch on the back)
220 Watts into 4 Ohms (41 Watts Class A operation).
440 Watts into 2 Ohms (20.5 Watts Class A operation).
600 Watts into 1 Ohm (10.25 Watts Class A operation).
Based on the specs I would go with the M1.2's