klipschorn modifications

Ditto...Klipsch forums -

A short list:

Replace Crossover - Options include those by Al Klappenberg, Bob Crites, Dean Westcott and others.

Replace Tweeter Beyma CP25 is popular drop-in. Beyma CP385ND + TD250 horn (needs padding) is another alternative. I loved a padded Fane 2020 on my Scalas.

Major overhaul - Replace metal midhorn with Martinelli wood horn.

Replace wiring harness with better wire (I used DH Labs silver in my LaScalas)

If you're keeping the metal horns line them with Dynamat or a suitable substitute.

There's a start for you. Plenty of opinions on all of'em. YMMV. Use your own ears and all that.

Marco

Agree, Klipsch forums are the best source for detailed modifications.

You have not heard how good Klipsch speakers are/can be until you've at least upgraded the xovers.

Wouldn't lining the horns narrow their geometry (or is that part of what's good?)? Any benefit from lining the outsides of the horns for damping? I love the suggestions -- keep them coming if there are more. I will certainly check out the forums.

Wouldn't lining the horns narrow their geometry (or is that part of what's good?)? Any benefit from lining the outsides of the horns for damping?

You line the horns on the outside, not the inside. You can use Dynamat, or you can get much cheaper alternatives at Parts Express. The Parts Express stuff is a bit easier to apply.

Metal horn damping can be cheaply, and very effectively accomplished with any brand of plumber's putty, or Mortite (http://herbiesaudiolab.home.att.net/rope.htm) which is configured in a way that makes it VERY easy to use. Inexpensively obtained at most hardware stores. Be certain to buy the non-hardening variety of plumber's putty if you go that route. The stuff is extemely dense and sticky, making it easy to apply to the outside of the horn. The stamped steel woofer frame is another source of coloration on these speakers, being a low dollar Eminence. Do the same to it. By all means address the x-over. Open air-core inductors won't saturate like the iron-cored in there, and metalized mylar caps are much more transparent than oil filled.