VSM with BBAM gives satisfying extension and wallop to mid 30hz range, and if you need more, integrates well with a sub set up with a benignly low crossover point around 30hz. This is a unique & effective combo: fast, seamless midrange and bass from 2200hz to 30hz from a single 6.5" driver, underpinned by a fast sub. Be aware that the sub needs to be driven by preamp line-level outputs, as speaker-level connections from amp to sub will not work properly with the BBAM's LF filter.
Merlin vsm question
considering speaker upgrade,
currently running von R.vr3, like full sounding speakers,
for medium volume levels,85db
heard good things about Merlin, looking for a more refined sound than the VR3, but don't know witch of the merlins, will suit my needs I'm confused about the vsm,MM,and mxe, super Bam. that's the difference among them,my budget is about $4500 used, and is it really a step up from VR3 to merlin?
running joulet electra 150mk11 preamp and quick silver v4 mono amps,KCI i/c cables, cardas GR spkr cables.
also considering Proac response 3.8
thanks
regards: '
currently running von R.vr3, like full sounding speakers,
for medium volume levels,85db
heard good things about Merlin, looking for a more refined sound than the VR3, but don't know witch of the merlins, will suit my needs I'm confused about the vsm,MM,and mxe, super Bam. that's the difference among them,my budget is about $4500 used, and is it really a step up from VR3 to merlin?
running joulet electra 150mk11 preamp and quick silver v4 mono amps,KCI i/c cables, cardas GR spkr cables.
also considering Proac response 3.8
thanks
regards: '
- ...
- 15 posts total
I'll pipe in here. I had the Merlin VSM-M for 6 years. I used them with Melos, Karan and a high powered class D mono amps. They never did it for me. I did have a balanced battery BAM. I used a tube preamp in all cases except with the Karan integrated. I do not think they are full bodied. My opinion is they are leaner sounding, but do put out good bass. I had ProAc speakers before the Merlins and went back to ProAc speakers after the Merlins. |
Stereo, FWIW Merlins are designed for tube gear. The result is that some of the characteristics of transistors will cause a lean sound in the speaker simply because the speaker design does not anticipate that the amplifier used will double power as the impedance is halved. for more info see: http://www.atma-sphere.com/papers/paradigm_paper2.html |
- 15 posts total