Omega Grande 8 vs. Cain & Cain Abby


Anyone out there have experience with these two high eff's? Vs. each other? Or relative attributes?

Thanks,
Tony
doctor_vine
The Zu Tone monitors are just a little more money. Having heard the same driver in the Druids and Definitions, it is an EXCELLENT wide-range driver. Bass response would be probably comparable, around 50 hz or so, and they're 101 db efficient.
Here's one I forgot. These are good values .Since there's no dealer cost involved JORDAN JX92s VTL transmission lines
. The cabinet cost is only $475. I doubt there's many if any speakers in the price range that would embarass them.
Gmood1:

The following is from the ZHorn site, regarding the transmission lines using the JORDAN JX92S driver:

"If one has enough power (the drivers are 88db/watt efficient) and an average to small sized room, these speakers are my very favorite."

Not even close to "high efficiency".

JD
No shit! Sherlock! If you were paying attention. You would have realized that Doctor vine is using a 60 wpc channel integrated tube amp. His speakers don't need to be 100dB efficient. In the end his setup will most likely be much quieter with a speaker of average efficiency. I don't know about you but I don't like to hear my speakers hum from the listening position.

The man listens to full scale orchestra. He needs a speaker thats lite on it's feet but with some balls. The single driver TLs are a viable way to go. This way he doesn't sacrifice too much dynamics for efficiency that he doesn't need. Not to mention the TLs will give him some of the most realistic bass out there. Without it there is no orchestra.

Cheers!
If you don't mind getting your hands dirty. Here's some instructions for making your own solid core silver speaker cables. They will last you a life time!Unlike copper,when silver oxidizes the oxidation is more conductive than the wire itself.The cost will run you under $100 for 8 ft runs of 16 awg wire and the Teflon tubing.
Go with 14 gauge teflon to make the job easier. Here's how you do it.Make Your Own
Audio Cables
. No need for connectors, as they only get in the way.