Review: Tube Audio Design TAD-60 Tube amp


Category: Amplifiers

I'll start by saying that I've been into higher-end audio for a few decades now, and quite a lot of equipment has been through my hands to this point (half the fun of this hobby). Somewhere around 12 years ago, I'd come to realize that I preferred tube amplification over solid state in terms of an overall involving presentation of the music, and ever since then have owned tube stuff (brief flirtations with various solid state devices only helped to enforce this notion).

Which brings me to the discovery of Tube Audio Design, the provider of components conceived by Paul Grzybek (of Bizzy Bee Audio fame), built to his specifications by a very reputable Chinese manufacturer, and then hand-finished by Paul in his shop located in Wheaton, IL. (His offerings are available exclusively online; detailed product info is found at http://www.angelfire.com/biz/bizzyb/index.html)

The TAD-60 amplifier is built like the proverbial tank; overall appearance and heft (not to mention its specifications) in my experience indeed belie the modest asking price. With its stainless steel chassis and almost 1/2"-thick black anodized face, the relatively compact package portrays a masculine but elegant stance (also included is a lift-off stainless steel tube cage). All function controls are easily accessible from the chassis top, as are the tube bias test-points and adjustment pots (a digital voltmeter is included too).

EL34-based, the TAD-60 is rated at 60wpc in UL-mode, and 30wpc in switchable-on-the-fly triode-mode. Other standard features include adjustable input sensitivity and adjustable global feedback, adding flexibility to a host of possible preamp and speaker combinations (the input sensitivity control may also be used as a volume pot in a single-source direct input configuration).

Listening to the TAD-60 after the recommended 30 hour break-in period and beyond, the music really began to open up, and along with the TAD-150 preamp, I was experiencing just about every CD I spun in a whole new manner - I'm particular to small-ensemble jazz and female vocals - there was an in-the-room conveyence of the music that I found startling at times - present is deep, tight bass, a glorious midrange, detail, depth, and an overall natural presentation that allows hour after hour of enjoyable listening. I've found that the feedback adjustment permits a fine-tuning of balance between dynamics and warmth, and was able to "lock in" the amp to my speakers for what sounds to be a perfect sonic match (just a tad of feedback along with the triode-mode setting seems to be the magic spot in my case).

Without attempting to describe every sonic attribute I'm hearing (though I'm happy to answer any particular inquiries), suffice it to say that the TAD-60/TAD-150 combination strikes a synergy and glow that is especially musical, and is among the finest I've had the pleasure of owning. The TAD-150 has already been highly praised in at least a few user and online reviews, and I bet the TAD-60 will soon be recognized as a similar standout. If you happen to be in the market for high quality, reasonably priced, excellent-sounding gear, just take a listen for yourself, and you will hear what these components can do for music. (Paul also offers a 15-day in-home trail period.)

Note: I have no financial interest or business relationship with Paul Grzybek or Tube Audio Design.

Associated gear
Magnepan 1.6QR, California Audio Labs CL-10, Music Hall MMF-5/Goldring G1012

Similar products
Conrad Johnson MV55
Sonic Frontiers SFS-40
VTL 50/50
Golden Tube SE-40
ASL AQ-1004
Sound Quest SQ-88
ggeers222
Ldatlof,
I got the Penta 88's up and running but it took a little tweaking. I normally would Bias with the Feedback fully right but that was not possible. Actually the left channels, V1 & V2 run quite a bit hotter than the other side. V1 has a reading of 635 at its lowest point so that's where the quad is Biased at. If i turn the feedback all the way up the left channels will oscillate, run excessively hot, and shut the amp down. I had one happy fuse "blown". So I tested a lot, being more careful and finally dialed it in. Paul was helpful. I still may send it in in the future to get a bigger range with the Bias while using 88's or 6550's. Currently breaking in the new tubes and it sounds very good. Thanks for the reply. let me know if you have questions. I'm sure I'll have some.

Jeff
New Finding on my oscillating problem. With speakers connected my Feedback knob will function full range with no problems. I read where it's best to have speakers connected on tube amps. Here's what I read, "An output transformer stores inductive energy, and a speaker load prevents this energy from being returned to the tubes in the form of high-voltage transients."

Jeff
Jeff,

Thanks for the reply. I am glad that you got the KT88s running. They are my favotite so far for this amp. I had never thought of adjusting the feedback before biasing the tubes. I used to keep my feedback at 10 o'clock but lately I have it at 1 o'clock. I just biased the tubes at what ever the feedback knob was adjusted to at the time. I really like the KT88's so I don't think I will be rolling in any different tubes for a while. I might start rolling the 12AX7s and 12AU7 tubes in the amp to see if it makes any difference.
I've recently installed the Penta KT88s in my TAD 60 and had a similar experience with high bias readings. The V1, V2 & V4 sockets all rose quickly to the 580 range while the V3 went all the way up to 620. After about 15 minutes at idle, the V1,2 & 3 settled in at approx. 525, while the V3 settled at 585. I'm new to tube power amps so this was pretty scary since I couldn't get down to that recommended 200 starting point but I emailed Paul and he said not to be too concerned unless the readings hit the 700 mark. They never did and all seems well after a couple days.

Dave