Agree. 5 and 6 in the up position, all others down.
Settings on phono stage
Here is the instructions:
Cartridge loading is achieved via internal dip-switches. Factory setting is 100 ohm, zero capacitance.
Two 6-row dip switch banks are located on the board. Loading is as follows:
- Dip Switch 1 up = 100 ohm; Dip Switch 2 up = 100 ohm.
- Dip Switch 1 & 2 up = 50 ohm.
- Dip Switch 3 up = 1K; Dip Switch 4 up = 1K.
- Dip Switch 3 & 4 up = 500 ohm.
- Dip Switch 5 up = 47K; Dip Switch 6 up = 100pf.
- ...
- 7 posts total
- 7 posts total