Teres Illius Tonearm and the importance of the Tonearm in the analog reproduction chain
Hi:
I want to share my experiences upgrading my Turntable System
in hopes that can benefits others. In the last 5 years I have been trying to
improve my Turntable system. Countless hours in the Internet lurking inside
forums, manufactures websites, articles in the world Hi Fi press etc. Making
the appropriate decisions regarding investing in audio equipment, especially
for high fidelity (audiophile quality) can be very difficult, especially if you
live in a place when you don’t have access to reputable dealers, and your
budget is limited, like mine. In this case your judgement will depend basically
on advice from others (Forums, Online Dealers and Manufacturers) or purchasing
equipment “blind sight”. There are a couple of reasons for that, one is that
music evaluation is very subjective. What is good for you may not be for
another person and vice versa. That is just the nature of humans and happens
with everything in our lives, food, clothes etc. The other is that in order to
properly evaluate the merits of a piece of equipment against another you need
to evaluate them in the same context. I can assure you that your Dynavector
DV-10X5 cartridge will sound much better if mounted on the Tech Das Air Force
One turntable and the Durand Telos Tonearm vs if mounted on a Rega P3 with the
RB 303 tonearm. And make no mistake, it should sound better. So it is very
difficult to make purchasing decisions based on other person’s opinion or
experiences. The different circumstances in which a piece of equipment was
evaluated and the broad range of opinions regarding a specific topic was
overwhelming to me and can lead to big money loses and frustrations. For me, it
has been a bit frustrating at times but overall an enjoyable experience. And I
have gained knowledge in the process.
In my opinion, the most valuable part of this thread is that
all the testing I’ve done was basically in the same context. From the beginning
a realized that I will need a good set of speakers or headphones to properly
evaluated the differences in sound. To this end I purchased a Beyerdynamic
Tesla T1 headphones and the Beyerdynamic A1 amplifier which I maintained across
all the upgrading process up to date. Unfortunately, the subjective part of the
evaluation is unavoidable. I want to describe my preferences in sound so the
readers can have the correct perspective when reasoning what I’m trying to
present here, and what I mean by improved sound. First, I do not have a highly
refined ear like some Audiophiles have (or pretend to have). I certainly cannot
describe audio experiences using the esoteric wording you may hear from highly
experienced audiophiles. Instead, I will present my audio quality assessment
based on real life experience as a professional musician. I’m a
Drummer/Percussionist with more than 30 years of playing at Pro/SemiPro level
and I use my exposure to real instruments and live performances as a reference.
And it is this experience what I’m trying to obtain from my analog playback
system. Basically what I’m looking for and considered a “good” sound is the
faithful reproduction of acoustic instruments and orchestras, jazz groups,
latin ensembles etc., which can be roughly translated to a wide soundstage,
excellent frequency extensions and outstanding resolution in all frequencies.
I’m going to describe the upgrade path that I followed
through the years chronologically:
Scott 390R receiver with built in phono stage,
Scott PS-97XV direct drive turntable with cheap cartridge (I don’t remember the
brand).
Same setup but with an ADC Integra Headshell
with XLM-III stylus.
Same setup with Funk Acromat.
Same setup with TWW periphery ring
Music Hall mmf 7.1 Turntable with Mojo cartridge
Musical Surrounding Nova Phonomena Phono Preamp
Rega P5 with RB 700 tonearm and Rega Exact
cartridge
Ortofon 2M Black Cartridge
Added the Groove Tracer Delrin Platter with
Reference subplatter to the P5.
Rega P9 with Power Supply, Rega RB 1000 tonearm
Dynavector XX2 MK2 Cartridge
Michell Gyrodec (latest version) with Rega RB250
tonearm and Dynavector DV-20X2 High Output Cartridge
Glass Turntable Mat
Origin Live Zephyr Tonearm
Whest PS.30 rdt Phono Preamp
Teres custom 255 Turntable, Acrylic lead shot
filled platter, Signature 3 motor.
Funk Firm FX-3 Tonearm.
Teres 3 point Illius Tonearm.
I’m not going to describe all the upgrades or changes in
detail but will do if anyone is interested in a specific upgrade. To cut the
cheese and go to the main point of this topic, the biggest improvement in sound
quality was made by the addition of the Teres Illius tonearm and was not even
close. I was simply astonished by what I was hearing. It transformed my system.
No other single component made an improvement as the Illius tonearm did.
At the time I purchased the Illius Tonearm I already have
the Teres 255 Turntable, the Dyna XX2 Mk2 cartridge, the PS.30 rdt phono preamp
plus the OL Zephyr and the Funk FX-3 Tonearms. So, I compared each of the 3
tonearms, head to head, with no other change on the system. You can say that
the Illius is a more expensive tonearm than the others and it is true. The
Zephyr is a $1300 MSRP, the FX-3 is about $2000 MSRP and the Illius $4800. But
I upgraded from a $1000+ Nova Phonomena Preamp to a $4000 Whest PS.30rdt and
the improvement was not as big as the Illius. Make no mistake, there was a
significant improvement from the Nova to the Whest but not as dramatic. I used
the same LP through all of the testing from the beginning (Scott receiver and
turntable up to date) and a specific track from this LP (Fania All
Stars-Spanish Fever, Track-Coro Miyare), that I know extremely well. The song
start with a deep “Thud” from a Tribal drum and from that moment I know it will
be something special and indeed it was. Well regarded tonearm designers such as
OL Mark Baker and Vertere Acoustics Touraj Moghaddam argued that the Tonearm is
one of the most, if not the most important part (or weakest link) in the
turntable system and after hearing my system with the Illius Tonearm I begin to
understand why.
In my point of view, the Turntable (Turntable+ToneArm+Cartridge)
is a system designed to convert information (Music) permanently stored in a
media (Record) to an electrical signal (Cartridge output). Each of the 3 key
elements of the system have an important task to perform. The turntable
(platter, plinth, bearing and drive system) is a platform whose purpose is to
appropriately support and rotate the media in such a way that it will allow the
cartridge to operate without interfering with the information retrieval (stable
rotational speed, vibration control, etc). The cartridge is a transducer that
converts movement to an electrical signal. It is a very important task and in
many points of view, including mine it is the most important element in the
turntable system. Then…….enter the Tonearm (wand, head shell, bearings, cables
etc), whose purpose is to provide the support platform for the cartridge to operate
(mechanically speaking), without applying any limitations. In other words, the
Tonearm can optimize or degrade the performance of the cartridge more than any
other turntable component. If the Tonearm can affect the performance of the
most important component then is almost as important as the most important. This
theory was clearly proven when I installed the Illius Tonearm. In my opinion
the big improvement in sound experienced was not the Tonearm itself but the
optimization of the Dynavector XX2 MK2 cartridge performance due to a better
cartridge support platform. Remember all other components of the
system, included the Turntable, Cartridge, Phono Preamp, Interconnecting wires,
Lp/Track listened, Headphones amplifier and Headphones were the same. Only the
Tonearms were changed. Thus the other Tonearms limited the performance of the
cartridge much more than the Illius Tonearm. How the XX2 MK2 cartridge will
perform if I replaced the Illius with the SAT Tonearm ($25k)? Who knows. But I
bet it will extract the last performance iota from it.
When I made the decision to purchase the Illius Tonearm, it
was based on a couple of facts. First, having already the Teres 255 Turntable I
know of the quality of the Teres products and Chris Brady commitment to
excellent quality and design. Second, I study the design principle and theory
behind some of the best regarded Tonearms in the Market like Kuzma (4 point), Durand,
Reed, Origin Live and others. The Illius Tonearm design have most of the key
designs elements as found in most of the World Class tonearms available today.
And it shows in the performance. Details of the Illius design and specs can be
obtained in the Teres website. I have no affiliation with Chris or the Teres
brand other than a very happy customer.
I have not tested or have experience with similarly priced
or more expensive tonearms so I cannot have the grounds to proclaim the Illius
the last Coke in the desert, but by judging the difference in performance compared
to the other tonearms I have (specially the Funk FX-3, which is no slouch), and
the Tonearm design, the Illius may be a bargain from the
Dollar/Performance ratio point of view. And most important, the installation of
the Illius in my system allows me to clearly understand the importance of the
Tonearm in the Record playing system.
I sincerely hope that my experience described here can be of
help for others following a similar path like mine and please, my apologies for
any grammatical errors as my first language is not English. Feel free to comment
or share your experiences and if you don’t agree or think I was not correct express
your point of view in a cordially and respectful manner. Keep listening!
Enter your text ...