Teres vs VPI, SME, Origin Live, etc.

I urge you to consider a Scheu premier II table direct from Germany. A 9" arm version with 80mm platter can be had for under 2000 shipped methinks. The standard 50mm platter is maybe 200 less. It can be ordered in a single 12" arm configuration, 9", dual 9", or dual 9"/12". This one is hard to beat for the price and an extremely good and well built table. I have a SME 312 arm coming to mount on mine to replace a unipivot arm I don't much like; ie, just cannot stand the side to side rocking motions of unipivot arms.

I second Lugnut. I haven't heard an Illustrious but I owned a highly modded OL Silver. It couldn't hold a candle to a Schroeder, any Schroeder. I'd be embarassed to drag an OL arm into the same room with a Schroeder.

At the meet Lugnut attended the $2,400 Schroeder Two matched or beat a $3,900 Graham 2.2/IC-70. That was with a ZYX UNIverse on each arm, same table, same everything, we even tried two different preamps and some stepups.

There are no commercial reviews of a Teres because Teres doesn't sell via dealers, advertise in mags or provide free goodies to reviewers. We've discussed this a few times in the past. What they do is make well engineered tables and sell them directly to users for lower prices. There have been a few side by side comparisons described here and on VA. Not many, but a search should turn them up.

I also second Mrmb's endorsement of small, cottage industry manufacturers. You have to do your homework, the mainstream reviewers won't do it for you, but the value and performance often go far beyond what larger companies provide at given price points. If you can set up your own table, arm and cartridge then why not pay yourself the dealer's share? That's what you're doing in effect when you buy direct from Teres, Galibier, Scheu, etc.

Here's one plausible setup near your budget:
Teres 265 (Rosewood) $3,875
Teres VTA adaptor 200
Schroeder DPS 3,900
TOTAL $7,975 before discount

Teres may offer a package discount to put it near your budget. That would be a fine front end. You didn't say what cartridge(s) you'll be using, what kind of music you like or what kind of sound you're after. Knowing all that would help extend the discussion.

My recommedation is a Redpoint Audio turntable. To be fair, I own one. Although I also did my research and included the Teres and Galibier in my search... To my ears, I found both the Redpoint and Galibier superior to the Teres models that i listened to (including the model 340). In addition, as both the Redpoint and Galibier are machined out of various metals, they are not prone to cracking and warping as a wood based table is.

Good luck!

www

Hello: For the past two weeks I have been listening to my new Teres 320 with Schroeder DPS arm and Shelter 501. This is the finest front end I have used. My previous tables have been Teres 255 with Tri-Planar, SOTA Cosmos Vacume with a Tri-Planar, Linn LP12, VPI Aries and JMW Arm, all with the same 501. The Teres tables have given me the most for my money. Not only do I find them stunning in appearnce but they have out performed by a significant margin my previous rigs. I have recently mounted a ZYX Airy 2 and have experienced another significant upgrade in sound. The Teres tables are rock solid performers. The Schroeder arm is very well made and takes some adjusting(as is expected). I did not compare the Schroeder to the Tri-Planar on the same table but I consider the Schroeder the finest I have used. If you are looking for top performance the 320 with a DPS ZYX will make you very happy. Regards....

All this talk about Schroeders is giving me an inferiority complex about my modded OL Silver! :^)