TW-Acustic Raven 10.5 or DaVinci Grandezza??


Seems like a crazy question!
I am getting a Raven one but will have a choice of the Raven 10.5 or DaVinci Grandezza for just $2000 more! Which should I go for? Well I am not sure if Raven one is a good match to this super arm but the 10.5 have got great reviews. Please give soem advice.
luna
10-26-11: Dertonarm
Rockitman, all you need is an oscillating pad and a µV meter - that's it.
The technical straight way to determine coil output independent from stylus position/mounting position.
This way you get the raw coil response - totally independent of any position of the polished area to a groove.

So you mean an Oscilloscope ? And if so, is it simply a matter of connecting the Oscilloscope ground clip to the ground on the left channel and the hot clip (+) to the positive (hot) on the left channel and measuring the voltage, then doing the same for the right channel and then comparing the two to see if the voltages match ? I don't have much Oscilloscope use experience. Just trying to undertsand how I would go about measuring the voltages.
Kdl, I am not "defending the undefendable", but trying (apparently futile with some ..but no problem with that either ) to show, that azimuth adjustment is a bit more tricky and demanding than most think.
And it often leads in the wrong direction.
Give me a reason why we should accept cartridges with a mispositioned stylus.
And don't tell me we have to because it is a fact of life.
It is not a fact - it is the exception and showing ill product quality - and there is no reason to accept a lousy manufactured product.
At least - not for me.
Period.
You won't find a NIB Lyra cartridge with a mispositioned stylus - and you won't find a NOS FR-7 series cartridge of 30+ years with a mispositioned stylus.

TW 10.5 ...;-) ... within Germany the history of that "german tonearm" is much better known than in the USA.

Read careful what you are quoting.
I took position against the "pre-introduction hype and laurels" - for good reason.
I am not particular crazy about that tonearm - because I see and hear no reason to do so.
The tonearm is o.k. and not cheap - no more, no less.
Period.
Sorry to have hurt the feelings of part of the fan-group.

You may have your doubts - as everyone who has no 1st-hand information.
You may ask a few TW 10.5 users (about 4 in the US do have an UNI-template for their TW 10.5 - I do everything on customer's request ...) - they will confirm that their 10.5 sounds in no way worse with "my" template.

All the TW fan group - and a few others will have a great time this late winter when my tonearm is introduced.
But relax - the price will put it out of reach for most, 70% of the limited edition is already sold prior to launch and it requests some really serious turntables to be mounted.

You'll have fun.
Dear Rockitman, I meant an oscillating pad - like the Nagaoka stylus cleaner or similar.
Then you need a µV meter.
An Oscilloscope isn't necessary, but nice to have anyway.
Yes, - you are measuring the output of each coil in µV/mV.
Dear Der, if I went the oscilloscope route, is my explanation of the process to measure voltage on a cart correct ?
10-26-11: Dertonarm

TW 10.5 ...;-) ... within Germany the history of that "german tonearm" is much better known than in the USA.

Read careful what you are quoting.
I took position against the "pre-introduction hype and laurels" - for good reason.

All the TW fan group - and a few others will have a great time this late winter when my tonearm is introduced.
But relax - the price will put it out of reach for most, 70% of the limited edition is already sold prior to launch and it requests some really serious turntables to be mounted.

You'll have fun.

Is this qualified for "pre-introduction hype and laurels" by yourself? :)