Need advice on good, clean, stable power


This is the chronology of my "bug," i.e. the "need" (or want) to upgrade.

* Yamaha RX-1400 clipped 4 full size and 1 center speakers during an intensive shooting scene of Tears From the Sun. I heard loud popping sounds from some speakers when volume was blasted off.

* I was advised by many A'gon members to get a multi-channel amp. I got the Marantz MM9000 (150wpcX5), which is plugged into a power cleaner with surge protector. Currently, the surge protector is Monster Powerbar 2100, but that will be changed to Monster HTS 3500 tomorrow in hope to get more cleaner power.

* Many A'gon members recommend to bypass the power conditioner and plug the multi-channel amp directly into the wall outlet, preferably a dedicated one.

My question now becomes if I do not want to install a dedicated line right now, would a more feasible alternative option is to use a regulator like the Monster AVS 2000? Monster Cable claims that the AVS 2000 regulator provides continuous 120V power, which in my opinion serves a good purpose for the multi-channel amp.

Sorry for I am not an electrical engineer, but that AVS 2000 sounds like a working solution for me. What do you all think about this route, or do you have some other suggestions in mind. Thanks for all the help with valuable advice.
lej1447
Aroc,
According to the threades, I have read that some A'gon members plugged their surge protectors, such as Monster HTS 700, into the back of power regulators, such as Monster AVS 200. Can this combination provide continuous, consistent, isolated, and clean power, possibly in lieu of isolated line?

I have never been a fan of Monster b/c I think that their products are like Bose. However, when it comes to high end power conditioner, regulator, and surprisingly Monster amplifier, I have read different results. Perhaps, these can be the results of the "halo effect," i.e. people give rave reviews b/c they invest their forturnes in those rigs. So who is better to consult than A'gon members for sound advice. :> )

Sorry to mention Slappy in here, but I have enjoyed reading most of his humours posts, and according to one of his posts, his draw dropped after listening to a 2-channel Monster amp. I like Sean postings too, but I can't modified 1/8th of things that he does to improve his rigs 1000X more for 1/160th of retail costs. Therefore, DYI is not in the picture as I'll settle for good preowned stuffs.

Thank you for all your feedback.
With a $500 budget, I would get two PS Audio HC UO's. Dedicated lines would be next next on the list.
When you can set aside $1199, go for the Running Springs Haley. This 6 outlet conditioner will take care of all of your clean, stable power needs. All of the Running Springs products are non coloring and non restrictive. We just installed a Haley in a full Marantz theater and it really took command of the issues. The 50" Marantz plasma video performance also went to the next level.
Hi Lej1447.
Dedicated lines???If you own your place,and want but don't know how to run two lines for your system.Here is the basics:
First check your service panel for the brand(sticker)and see if you have available spaces for extra breakers.In most cases you should have room for additional breakers.Go to Home Depot and tell the guys there the brand of your electrical panel.They should then give you the proper breakers that fit your panel.Buy two 20A breakers and enough 12Ga electrical wire that will run from your panel to your system.Account for the extra turns you might have to go with the wire.Always buy more than you need.Turn off the main switch of you panel to cut the electrical power in the home.When you take the cover off your panel you will then see how the rest of the breakers are connected.Just plug the breakers in and connect the the wires(you just bought)white-black,ground following the colors like the rest of existing breakers.One thing though you should feed the wires from the panel to the location of your system(follow the baseboards or best to do in wall installation)first and then proceed with the panel connections.If you do surface installation another words 'follow the baseboards" you can buy(a must) special tubing from Home Depot that's designed to house the wires out of harms way.The best ones are metal and they open ,come with elbows so that you can go around corners.At the end of the wires connect the 20A receptacles.It is easy and I am sure you can manage.
I am not an electrician by trade,but I've done the above in my home several times.I am a DIY,kind of a person.
Best luck.
George
Hey guy, take it from somebody who has been there. I did the panamax,monster, and other various "conditioning' products. The cheapest and best bang for the buck is to install a dedicated and isolated line. You can go for the very resonable materials found at your local H-Depot, or for not that much more go for the products dedicated to audio found on this site. Just remember this; All Good Sound Begins At The Wall!!. An isolated line will help to get rid of most of the line noise. This type of line is used in hospitals,computer centers,and wherever sensitive electronic equipment is in use. Depending on your panel box to system configuration your cost could be very minimal, approx $100.00-$200.00. Then look into a good power cable.

As far as your "flu shot" I'll be the first to inform you that its too late. If you are on this forum you've got the bug! The quest to improve your audio system will always be a matter of importance for you, get ready for a long and interesting journey.
Rodge