OK - I know I have gone around in circles on this, but can now conclude my findings until some of the stuff I have ordered from the US arrives - probably two weeks time. Suspension - much less resonance than conventional supports, but need to use a non-resonant wire for best effect, heavy guage nylon fishing line is good - forward images are more forward, plus greater depth and 3D images, bass region is very clean allowing mid-bass to propel the music, everything is a bit more present, and resolution is enhanced. Corian - is a bit like other heavy supports like marble, perspex etc in that its bass is very strong, but that there is resonance across a wide band (ie. not peaky) throughout the midband which sounds like grain - this can be reduced by using pads instead of spikes to support the Corian, but is even better if suspended on wire - this resonance effect can be almost totally eliminated by selecting the right footer. After much experimentation I have concluded that Vibrapods are the best with Corian. I found that the use of soft rubber footers was plain muddy. I found that using cones or hard rubber footers was OK but had a slightly dead quality (referred to by Recres above), shades of what I hear in spades with sand boxes. Last night I got a bucket of Vibrapods and painstakingly selected the best model and placement until I had optimised the sound. The result was fantastic, and much better than my first attempts with Vibrapods when I was using higher model numbers than I wound up using last night. There is NO vestige of the dead quality now and the music is highly involving - that bass just propels things along beautifully. I have performed some more experiments with the Corian in terms of its ability to support heavy equipment and find I cannot agree at all with Kitch29 above, but my Corian shelves span 19 inches, not 24 inches of course. My shelves have no trouble supporting my 130W valve monoblocks and do not sag at all. For very heavy amps I guess you could be better to bond two pieces together. I am not saying Corian is ideal, but the combination of suspension, Corian and careful selection of Vibrapods is giving a result that is light years ahead of conventional glass or MDF shelves. I expect that the Neuance shelves, Polycrystal shelves, and Maple butchers are capable of even better results - but right now my shelf obsession has abated somewhat. I will report on these other shelves in a few weeks time when they arrive.
Shelf Material
I have tried so many different shelf materials, and some are better than others, but I feel like I am just spraying bullets that always miss the bulls-eye. So far, I cannot live with the brightness of glass, the ringing of marble or granite, the sluggishness of acrylic, the muddiness of mdf etc. Light and rigid seems better than heavy and dense - in that I can live with the downsides more easily. I use heavily constructed welded steel racks - spiked to the floor and upward spikes supporting the shelves - and I reckon this is right. I like the way bladder products get rid of the resonances that plague shelves, but find that the way they slow down the pace of the music is hard to accept. Does anyone have some answers on this?
- ...
- 88 posts total
- 88 posts total