2. speakers
  3. 134885-2137

Sound Anchor Stands

I'm considering Sound Anchors stands for my new Pulsars. They have a top plate which bolts in to the holes in the bottom of the speaker. Blu-tak is not necessary and stability is enhanced. Since they are metal stands, can the bottom of the speaker be damaged by placing it on the metal top plate directly? I was told that wrapping clear packing tape around the top plate would work, but I don't know. Any thoughts or suggestions?
rlb61
rlb61 OP
362 posts
 
@markalarsen ... my thoughts, exactly.
Post removed 
dames4
12 posts
 
The best option are Atacama Non-Slip Gel pads. Works perfect with
Sound Anchors stand.
Post removed 
rlb61 OP
362 posts
 
I just received the SA stands. A "hardware pack" for each speaker comes with two allen wrenches and two small black bolts which, I presume, bolt into the two screw holes on the front bottom of the speakers. Another "hardware pack" comes with the jam nuts, washers, spikes, and four larger black bolts. I don’t know where these larger black bolts screw in. Any ideas? I have sent an email to Sound Anchors on this, but thought maybe someone might have a quick answer. Thanks.
More to discover