2. amps-preamps
  3. 137509-108796

PrimaLuna amp good match for Thiel CS 2.3?

Thinking about pairing PrimaLuna with Thiel CS 2.3s, with these speakers assume I’d benefit greatly from amps on the high end of PL’s wpc range, and looking to purchase on the used market in the $2000-3000 range, so considering ProLogue 7s up to DiaLogue Premium HP.  Any watch-outs or recommendations?  Rogue or CJ also possibilities.....
128x128thosb
tomcarr
530 posts
 
+1 @georgehifi ,

OP, Almarg does indeed give good info, disregard his advice at your own peril.

Tom
georgehifi's avatar
georgehifi
4,966 posts
 
tomcarr456 posts08-22-2018 7:18am+1 @georgehifi ,

OP, Almarg does indeed give good info, disregard his advice at your own peril.

Tom
Your welcome, he has his good days, and then some diplomatic fence days, when it comes to "voodoo" in audio.

Cheers George
luxmancl38
129 posts
 
I had 2.3's and used a pair of modified Threshold T-50's. They put out 100 wpc in pure Class A. 2.3's love high current amps. The late Jim Thiel was not a tube guy. He really liked pairing his speakers w/Bryston amps.
unsound
6,115 posts
 
The Bryston’s might have worked well with the earlier Thiel model’s, but the later models with their sub 4 Ohm loads might be better served with alternate amplification.
thosb's avatar
thosb OP
76 posts
 

Here's what I am using right now -

https://www.stereophile.com/content/krell-kav-400xi-integrated-amplifier-measurements

I am not using the preamp, to my ear, using the HTR bypass and the volume control on my DAC sounds better.  Like I mentioned, I love the sound of tubes and am trying to figure out the best way to integrate them into my system at a reasonable price point ($2-3000, used is fine).  Ultimately, the goal is to reduce harshness in the highs and give more body to the mids.  If there's a ss amp out there that would help achieve this I am all ears.  Suggestions?

More to discover