driving Verity Audio Parsifal Ovations?


I am considering driving these speakers with a high quality integrated amp such as the Luxman 590A11 (pure class A, 30 wpc) or the Luxman 509u (class AB, 120 wpc).

Has anyone been happy with Luxman or other integrated amps such as Pass etc driving the Parsifal Ovations?

Regards,

Mark

toronto416
great way of sharing all Verity experiences.
30 watts may all be what one needs, it's not about the watts it's about control and dominance and capability. aka powersupply.
Prime example the 30 watt Accuphase Class A model. small amp, low watts, big performance.

another example: the LAMM ML2.1 SET.
it has 18 watts no more, but one of the best powersupplies and output transformers money can buy.
those 18 LAMM watts sound very dominant and controlled.
that's what you pay for ;-)

watts = SPL's.
control = powersupply.

so either Solid State and Tubes can have low wattage and still sound extremely powerfull.
it's not howmuch, but how you do it.
I'm been using the 4 ohm tap on my amp as I thought the manual states the Parsifal to be an 4 ohm speaker. Am I wrong? Why do you say it's an 8 ohm speaker?
I used to drive my Parsifals with the Tenor and didn't find it as very musical. I next switched to the CAT JL2, which was a vast improvement. I now have the Music Rerefence RM9 SE and this is the best combo by far. I A/B'ed the CAT and the Musical Reference and the RM9 SE/Parsifal was way superior to the CAT/Parsifal Combo. I think you'll be hard pressed to beat this, especially when using the Wiwires I/C's and speaker cables.
I was using a Cary SLI-80 to drive my Fidelios with great success. However when I upgraded to the Parsifal Encores the Cary sounded a bit thin and became very midrange heavy. I swithced to a BAT VK300x SE integrated and problem solved. In my experience it seems the Parsifals benefit from more power. Even at lower levels (majority of my listening) the power really helps fill out the lower range.
Any new perspectives on this issue? I'm in the market for a new amp for my P/E's. Tubes need not apply, and I need at least 200wpc, preferably monoblocks - budget up to $7000 used. There are a few pairs of reasonably priced Classe CA-M400 listed. 400wpc overkill may be?