Useful tweaks for Oppo 980/DTC 9.8 for MC-SACD


I have recently upgraded to the Integra DTC 9.8 and Oppo 980H primarily to enjoy MCH SACD. My two channel SACD is a VSE Mod 4 Sony 9000 that runs through the 2-channel portion of my system. The new Oppo/9.8 sound very good indeed. In direct comparison playing 2 channel SACD versus the VSE Mod 4 it is not quite as musical (Depth, high end extension/linearity, dimensionality).
I was wondering if anyone has tried any tweaks to their Oppo or DTC 9.8 that have been musically significant such as chassis damping, isolation, power cords. It is a great price performance combo. I am just looking to maximize the potential performance. Thanks in advance for your input.
tellefsen
If you're looking at Oppo mods you might want to check out www.tweakaudio.com. Ric's been modding these things for quite a while and is a pretty straight shooter. If you get to speak with him I'm sure you'll come away a little wiser. Best of luck.
FYI
The 980 does benefit from a better power cord, naturally. How better? Depends on the cord being used.
Different footers too will help. Also placing some weight (not a lot) on top will help out too.
of course so will a good stand or rack to put it on.
An outboard DAC is (depending on the DAC) gonna really change things... and for the better too.
I use mine primarily for DVD via HDMI, and 2 ch red book, via a Stereovox XV2 digital link into a BC DAC3.

As to modding it.... Why?

I believe thoughts on modding a player IMO might be better suited to another step or so up the line, or one with a better transport.

With a DAC which de-jitterizes the signal well, it'll come down to how much denairo ya got, and how picky are your ears. Running both a SCD xa 777es, and the 980 into the DAC 3, the sonic diffs were quite minimal.

If a one box deal, and multi ch are your preff, go for it. I would consider the 983 as well, though.
I've had two modded Oppo players, a 970 and a 981. The simplest area to do mods on those is on the power supply board, since the power supply board could be easily removed and the components are fairly easy to access. And, no surface mount technology. I hope that's the case with your 980.

The mods on my players were more extensive, in addition to the power supply upgrades. The 981 had several capacitors and the stereo-channels op amps upgraded. (Not sure of all the details, since I bought the unit already modded.) The 970 had almost every capacitor (a lot!) upgraded but no op amp upgrades. A friend of mine upgraded the 970. He said that the power supply upgrade was no big deal; but as far as upgrades on the main circuit board (which takes up most of the chassis)--well, I doubt that he'd be willing to do that again.

So yes, audio performance (specifically, from the analog outputs) did improve, but it never really impressed me as "audiophile." I doubt that it's on par with your modded Sony.

I sold the 981 (nice player, I just wasn't using it) and still have the 970, which I use for watching movies and for multi-channel listening. FWIW, I don't use a processor. I feed the analog outputs right to a multi-channel amp and a powered subwoofer, so I have sort of a minimalist HT system. I'm actually quite pleased with it. I just don't think of it as audiophile.

Back to my earlier point, a power supply upgrade might be the most cost effective upgrade, and may well improve both audio and video, including audio through the HDMI. And it's relatively simple to do. As for the rest, well if I were going for audiophile-caliber multichannel sound, I'd be looking at a different player.
I am runnng the Oppo via HDMI to the DTC 9.8. I was guessing other than maybe power cords on the Oppo, there might be useful tweaks on the DTC 9.8.
I am running a 981 to my 8.8

I have done the following - never did A/B before and after, just sort of did it by reflex

I used the Verastarr damping material liberally inside the case. Its one of those sheet metal jobs that goes thonk when its stock. Now its more like thud

I use an Oyaide C7

Because space is extremely limited I use a set of Herbies Tenderfeet underneath it - I would top load if I had room as well

I run a Wireworld HDMI out

As I said, no A/B but it works really well

Waiting on the new Oppo BluRay - assuming that it will also play DVD well, I will scrap the 981 and the Pannie BD30 for the one unit. At that point I may also consider a modder upgrade package