Worth having my SOTA Sapphire refurbished?


I own a vintage 1986, SOTA Sapphire turntable, fitted with a Linn Basik tone arm, with some sort of old, Audioquest cartridge (it has a red housing). After a lengthy remodel, I am finally getting ready to unpack my stereo system once again and get it set up. I have miles and miles of beloved vinyl. :-) My listening room is on the small side. I value transparency and imaging over sheer volume.

Associated equipment includes a PS Audio Elite Plus integrated amplifier (I think it has 70 W per channel). I recently sold my old Vandersteen 2C speakers here on Audiogon (for space reasons in the new house) and am looking to replace them with Regas or Paradigms, probably monitors (but that a whole other question)!

Anyway, the SOTA probably needs some inspecting and tuning. I think that the motor and bearing are okay, but I'm guessing that the suspension springs need adjusting or replacing; I think they're a little stretched out.

SOTA has an inspection and tune-up/repair service. Have any of you ever used it? I'd have to ship the table off to them, and, apparently, pay for return shipping as well (I do have the original box) and the table weighs around 50 pounds in the box.

By the time I do all of this and buy a new cartridge, to boot, I'm looking at quite a chunk of change. Do you think I'm better off selling the SOTA and putting the money toward, say, a new Rega P2? Please, no flames; I've been out of the active high-end scene for many years, so I have no idea how those tables compare.

Anyway, all advice appreciated.
rebbi
I'm in the same boat with a 20 year Star, with a trade in I will buy a new Nova or take my Tax returns and go for the COSMO, I will be set for life! Recently purchased the Sumiko Pearwood ll for my upgrade!

First of all, do you have the owners manual? If so those turntables are very robust. I doubt it if it needs servicing other than minor adjustments which with a little patience you could do yourself. I know I use to own one. They are not easy to ship. You have to make sure the spindal is not setting on the sapphire bearing and as you mentioned they are very heavy
Any updates on this thread. I recently purchased a Sapphire for...$175. I think really ancient. Serial number in the bottom of the TT not in the back and blue platter mat.=)
Luvmuzik66,

Hi!

Yes, I got my Sapphire refurbished by SOTA back in '08. Everything was fine. The only real hassle I had was that UPS broke the original dust cover in shipment to the factory, so I had to spring for a new one. (And yes, I filed a claim with UPS, but because I packed the gear myself they wouldn't cover it.)
The table has performed flawlessly since then! I have still periodically toyed with the idea of upgrading my arm but with money being rather tight I've stuck with my old Linn Basik.
By the way, they did install a new Ortofon 2M Blue at SOTA since the Audioquest cart on the arm was ancient.
So my experience was a good one, over all, other than the long time it took to get the table back. But the owners were great to deal with.
Nice to find this thread.I am currently in the same boat. 86/87 Sota star sapphire, one owner, Zeta tone arm, monster alpha 2 high freq MC cart. Not a big turntable user so have little to no knowlege as far as setting up, tone arm set up, etc..., but the price was right so here I am.

I hooked it up, reading everything thing I can on the unit for months and I'm stuck. Table has a slight wobble (it reads level,both platter and body). I have minimzed that through set up as best I can, but i can still see it. I am getting static out of the right channel. I inverted the RCA jacks, and the static goes to the left.It seems the static hits on the up wave of the wobble. The Vaccume also does not work. I'm also not sure how to set up the arm properly and wonder if that is the/part of the problem? They zeta "manual" tells you what to do, but I dont know antis skate from tracking force to counter wegith, etc...

I really just want a plug and play unit. I was thinking of selling the tone arm and cart, getting what I can for the table and buying rega, clear audio or pro ject with the cash I get from selling the arm, cart and TT, but everything I read says don't, the tables are great, etc...

I also have the original box. I was thinking about taking it to a local shop, but the guys are pretty unfamiliar with SOTA. They have heard of it of course, but meh, not sure I'd want them workin on it. My other option is sending it to SOTA, but time, packing and money does not seem worth it. Its not like I have great equipment to start (Moscode 300 amp, parasound p3 pre, parasound phono amp over some B&W 603s3). I also got a pair of acoustat model 1s with the TT as well. Driving me crazy to see guys with $100 turntables enjoying there tunes,while here I sit with what appears to be a pretty good set up, unable to enjoy the records that came wiht it,as well as all I have bought. Any advice would be greatly appreciated.