To me that sure doesn't sound like run of the mill sibilance - it sounds like some pretty serious distortion that Goatwuss has every right to want to be rid of. I don't agree that he is just sensitive to sibilance and may never find satisfaction with vinyl playback. Something is wrong with his setup or his copy of that record. The only records I have that sound nearly that bad are damaged ones, and they don't get played more than once. If we can't agree that distortion of this level is objectionable (and suggest that members look to digital if they find it as such), why are we wasting our time discussing, ad nauseum, tiny differences orders of magnitude smaller than this?
Killing sibilance distortion - VPI & Jubilee
Hello,
Along with what others have posted in the recent past, I also have a long running case of nasty distortion on sibilants with my vinyl playback. It is worse in the inner grooves.
To build on some other recent threads about this topic, I ordered a MFSL that is supposed to be a good test for mistracking. I have made a recording clip of my playback playing some of the last track on Side 2.
I have the recording on this link:
Playback Recording
If you take a look at that, we can all be on the same page with what exactly is going on.
The setup is a VPI Scoutmaster table, JMW9 sig arm, Ortofon Jubilee cartridge. The table is leveled on a Salamander Archetype rack. VTA is set with the arm parallel. VTF is set to 2.4g. Alignment is setup with the MINT arc protractor, 10x magnification. The VPI mechanical Anti-Skate is being used, with the lighter rubber washers. Azimuth is level by means of the "VPI straw trick" (a straw in a groove on the headshell).
Is there anyone that can point me in the right direction to fix that sibilance distortion you're hearing on the recording?
I've tried quite a few things, including different cartridges, and VTF, VTA and antiskate settings, but the sibilance is always there.
Here are some photos of my setup:
Cartridge Closeup
Aligning with the MINT
Thanks for reading
by Goatwuss
Along with what others have posted in the recent past, I also have a long running case of nasty distortion on sibilants with my vinyl playback. It is worse in the inner grooves.
To build on some other recent threads about this topic, I ordered a MFSL that is supposed to be a good test for mistracking. I have made a recording clip of my playback playing some of the last track on Side 2.
I have the recording on this link:
Playback Recording
If you take a look at that, we can all be on the same page with what exactly is going on.
The setup is a VPI Scoutmaster table, JMW9 sig arm, Ortofon Jubilee cartridge. The table is leveled on a Salamander Archetype rack. VTA is set with the arm parallel. VTF is set to 2.4g. Alignment is setup with the MINT arc protractor, 10x magnification. The VPI mechanical Anti-Skate is being used, with the lighter rubber washers. Azimuth is level by means of the "VPI straw trick" (a straw in a groove on the headshell).
Is there anyone that can point me in the right direction to fix that sibilance distortion you're hearing on the recording?
I've tried quite a few things, including different cartridges, and VTF, VTA and antiskate settings, but the sibilance is always there.
Here are some photos of my setup:
Cartridge Closeup
Aligning with the MINT
Thanks for reading
by Goatwuss
- ...
- 96 posts total
- 96 posts total