"Commercial" plasma screens the real deal for HT?


Following my other thread where I was asking for advices on $1500 screens for my small 10*11 audio-video room to be used solely for DVDs (no TV cable input), many have amswered that the best deal remain traditional CRT TVs, wide-screen (Sony Wega or XBR).
I stumbled onto a forum that advocates the purchase of commercial plasma screens (about $1500 for 42": Matrix, Hyundai or other NEC) with none of the consummer gadgets, no speaker, just component input. That would do the job for me as I have no HDMI output on my McCormack UDP-1.
What is the catch, if any? resolution (800*400 and change) too low? reliability? this seems to be a good deal to me and will not create a big mass between my audio-first speakers.

Any opinions?
Thanks
beheme
I would be intrigued to hear more information, too.

The consumer "features" on most of the plasmas I have seen are really lousy, and every time I ask for no speakers, no tuners etc, salesmen give me a blank stare.

The "real deal" for HT, IMO, might have higher resolution but perhaps there are commercial monitors for HD as well?
Most of the commercial plasmas I've seen have been pretty close to the consumer versions, but without some of the bells and whistles. I bought a commercial Panasonic EDTV plasma--great deal, and quality-wise no different than their consumer models. Like some of the other commercial units, it had blade slots so you could add on other inputs--I added a DVI/HDCP card for that input. Pioneer also has a well regarded line of commercial units. If you don't need speakers, it can be a good deal. Probably not the end all or be all of HDTV, but worth considering. The gurus over at http://www.avsforum.com can give you specifics.

You also have the flexibility, if you are interested, in buying four of them (or nine of them) for a really big plasma screen. ;)
If you are concernced about having some big box between your speakers I would reccommend looking into getting a front projector for your space. You would mount a screen on the front wall, the projector on the back wall and have nothing between your speakers.
I have the BenQ pb6100 which can now be had for about $750 or so. From 14 feet back I have a beautiful 90" diagonal picture on a pull down screen on my front wall. If you are looking for an immersive movie experience at home, that is the way to go. Check out AVSforum.com for alot of info and screen shots on what you can expect from a front projector. There are many that can be had for around what you want to spend and they are alot more fun than a tv. Send me an e-mail if you want some more info.
I have the "Commercial" version of a 42" Panasonic plasma. It is identical to the "residential" model, except for some bells and whistles that an audiophile would not use. You save money not only because some stuff is omitted, but also because the commercial distribution chain has lower markup.

Even though it has no speakers, it does have two ten watt audio amps, with volume control on the remote. They don't play very loud with low efficiency speakers, but if you used high efficiency single drivers they might do the job for you.