Say it aint so--- Teres quality question


As a preface-- I have been a lurker here at Audiogon for a number of years, but have never posted.

Yesterday a review of the Teres 200 series table was posted at Audioasylum. I am extremely concerned about what was stated.

I have always read fantastic things about the Teres, but this reviewer seemed to consider some issues with regard to quality-- ie:

"Some minor issues...the wood platter is not 100% true on the horizontal surfaces...a very slight rise...I suspect this is the nature of machining wood?" as well as "Product Weakness: Platter slightly off true"

I plan on joining the Teres family -- but have developed some reluctance after reading this.

Perhaps some of the members here with first hand experience will be able to put my concern at ease with regard to the reviewers statement.

Here is a reference to the post:

Review by Angus Black III on January 06, 2004 at 10:35:32

Thank you, and a special thanks to TWL for the always informative reading.

Focusedfx

128x128focusedfx
Thanks for the nice comments. But I think it may be best for me to just stay out of this now. I'm sure you all can come to your own conclusions just fine.

Pat, I agree that it is in everyone's best interest for an audio manufacturer to have good QC and customer service.
Tom, apology accepted, both here and via e-mail. Perhaps I should have only e-mailed you but I felt I was being mentioned as having some vendetta against Teres, which is not the case, and I wanted others to know that. I feel that perhaps this was a case of someone having a bone to pick with what one individual says and being too PC to call them out individually.

It goes without saying that you have been a great help to many on this board and your recommendation of the Teres is not unfounded or unappreciated, nor was such even so much as alluded to in this thread by anyone. That was certainly not my point at all. My only point was that those who call it (or any product) into question do not necessarily have sinister motives. If one does, and another knows that, I think it is their duty to call them out specifically. Since I was the ONLY one to take issue with ANYTHING you said here, something as melodramatic as leaving the thread is clearly unwarranted, as others have said.

I will also add my apologies to the other posters here for wasting there time. No acrimony on my part, just trying to clear my reputation (with need or not).
Joe, Intarsia for the Teres! Hmmm. I recall doing a lot of that at one time including a project for a woman who wanted clusters of grapes, vines, and leaves to spread out over the back stretcher of a rocking chair and then spill down the sides and out onto the arms. A toughy.

What are your plans for your wood table? Just on the base, or maybe musical notes round the platter! :-) One thought is that if you're going to use coco, SHARPEN those tools! :-)

I still have a great affinity for marquetry, though, and can think of any number of inlay patterns that would be absolutely stunning on an all-wood table.
Okay, Teres owners please take out a ruler and tell me how tall your armboards are. I'm getting conflicting information as to the height. Chris states in an email to me that 27 mm (1.06") is the right height and that sounds good based on my problems. The one supplied was over 41 mm (1.60") and another owner is under the impression that is the correct height. The only thing I can think of that would make both these two dimensions work is if the platter height had changed at some point.
Although this thread seems to have gotten a bit terse, I would like to say...

TWL, I highly value your input, and look forward to the continued sharing of your knowledge and wisdom in future threads. It is with your unselfish willingness to share both your time and experiences that I have learned a great deal with regard turntables-- I respect your decision to exit this thread.

Jphii, A huge thank you for taking the time to document your work, and provide everyone with photographs via your outstanding website. Exemplary woodworking, I can't wait to see the finished table. WOW!

Focusedfx