Unequal cable lengths for home theater????

The difference is resistance is actually trivial. Remember that resistance faced by your amp includes both the cable and the speaker. So if you're using 12 AWG cable, the difference in resistance between a 2-foot length (0.0034 ohms) and a 10-foot length (0.0170 ohms) doesn't matter a whole lot to an amp driving a speaker whose resistance starts at, maybe, 3 ohms and goes up from there.

My fronts are are all equal, but I think this is hard for me to justify, unless the electronics do change. Changing the speaker wire a foot changes by a factor related to speed of light. Moving a speaker changes by a factor of he speed of sound. Too lazy to do the math, until the cable effects (resistance, inductance if you "spool it" to shorten one, which is really bad idea) the actual sound, timing wise a spool of wire should make as less difference than moving a speaker an inch, so having maybe a 50% difference in cable length (making that number up) hardly seems important. So if Bomarc is correct, and he should be, close should be fine. Anthing else is likely the "psychoacuotics" as one poster called it. But, I keep em equal anyway - I am mostly psycho....

Truth be told, mine (2-channel only) are equal, too. Superstition.

Shaqspack, I really dont want to be the picky one here but.....

Ideally electricity moves at the speed of light.

However this speed is only constant in a vacuum. Speaker wire isnt a vacuum, so its speed would be relative to its properties.

Furthermore, electricity is inhibited by inductance and resistence and it is commonly argued that its approximate speed through copper is 60-80% that of light.

FWIW, =)

TOTALLY AGREE B.!