Power supply improvement for CD player


I'm using a Lexicon RT 20. Can the PS be improved? How?
ptss
Have you ever tried a Power Cord setup as I suggested? At least you don't sell power cords, so you could keep yourself open to that. Dan D'Agostino uses a method I wish I could use, #8(?)gauge twisted copper from the transformer to the breaker box(done by the utility co.). Prohibitively expensive for me. Beyond that, considering the wire quality running from my box (it is not Kimber Kable)to the wall outlet, the relatively short wires that connect the unit to that outlet need only to mach that in-wall wire's (must be copper, no aluminum)transfer capabilities. Twisted strand and conductor(to spin-off magnetic field)copper cable is not expensive. Shorter is better. If there is excess length, braid it as possible for even more magnetic field rejection. Snap-on, or pull-over RF Blockers(of largest diameter you can find)on each end. Aftermarket types, used with typical in-wall wiring, can only mach that at any price(tang quality of the plug and receptacle is an exception). This is my view. I did not belittle your advice or dismiss your methods. I had no aim to be cynical. You(RODMAN99999)had mentioned your "experience" in response to me, first. No "pissing around" here. I respectfully related some of mine.
And no, I haven't listened A/B to modified such as mentioned. I would like to. I am waiting on my new system to become available(Sony TA-A1ES/HAP-Z1ES). I will then take an exhaustive look for ANY possibilities, and I will Post.
Hello Mr C- I only mentioned my experience, directly
related to modding, not overall schooling, etc. You'll
notice that I never put your advice down. I never
personally hardwire PCs, because I like to be able to try
different PCs on my equipment. IECs facilitate that, not to
mention being able to keep a valued cable, if I sell the
gear. Some of the first mods that I ever tried, involved
ferrite beads on every internal wire, as you recommended on
the PC. I further recognize the value and wisdom of
eliminating contact points and isolating power supplies from
adjacent circuits. I'm actually big on removing the power
supply from the chassis altogether, when practical. I do
still(or otherwise) extensively use the shielding I
mentioned in this thread: (http://forum.audiogon.com/cgi-bin/fr.pl?htech&1328289757&&&/Shielding-components-from-EMI-RFI-Help-p) (http://www.emsclad.com/examples/emi-rfi-shielding.html)
This stuff would be my choice, in place of your
foil/cardboard idea, though at a much higher price point:
(http://www.tweekgeek.com/stillpoints-ers-rfi-killer/)
Cj. I have found the MIT Oracle AC3, a non-networked pc, to be a "vast" improvement over stock cords. Have you ever tried one?