Audio Research Reference 250 capacitor issue

How many caps failed? I've own tens of thousands dollars not ARC equipment and components fails too. Shot happens.

Are your statements on the white caps based on facts from ARC? My Ref250 is months old and has a combination of white and gold caps so if white caps are known to be problematic, I doubt ARC will continue using them.

According to your system page, you bought Ref250 used with 200 hrs so you put 450 hrs in 3 years. I thought ARC warranty is not transferable and only valid for orig owner.

There are 2 white caps infront of 8 Tubes in each Amp and one of them failed. But I have to replace all 4 . Also part of upgrade ARC has sent new cables which are connected to the Balanced outpu (The cables which are running from front of the board to outputs)

I was looking at buying an used Ref 150. I got the serial number from the seller and asked ARC tech when it was manufactured. It was in 2011.

I then asked if there is any difference in terms of innards - components used - in the 2013/2014 Ref 150 versus one manufactured back in 2011. He told me the earlier ones has white Teflon caps, but due to 'no more supply' of those caps, ARC switched to the gold color Teflon caps.

I then asked him if there is any quality (sound quality) difference, and he said "you probably won't hear any difference".

There was no mention of any reliability aspect of that white cap versus the new gold cap.

this mix of white and gold cap got me thinking ...

You were offered the whole kit - which consists of all the caps, for what reason?

Because ARC feels its an 'upgrade' (i.e, better parts, better sound)?

Or because ARC doesn't have the old white cap in stock any longer, and because you cannot have a mix of them in your amp, therefore you had to buy the whole kit and replace all the caps? But then, one of you mentioned that your Ref 250 contains a mix of white and gold foil Teflon caps. So what's the deal then?

If you have one of the more recently manufactured amp with the gold foil Teflon cap, and one cap goes back, does it mean that you only need to buy/pay one cap as replacement?

I am going to call Kalvin at ARC and ask him these questions tomorrow.

Been passing messages with Kal. I asked some follow up Qs that pose the same Qs as posed above. I'll report back.

Btw, Kal mentioned that the G Series should hit the stores soon. He sent me a spec sheet on G Serie gear. The G-150 has almost identical specs to the Ref 150, e.g., wpc, power supply, etc. The wpc spec was a little higher than the Ref 150, but I attribute that to the KT-150 tube.

Kal said the KT-150 are still not approved for the current Ref line. I think this is about marketing.