I wouldn't think either of the speakers you list would present a difficult load. The only question I have is the minimum impedance measurements. I'm assuming the 9 ohm and 6 ohm specs that you list are nominal impedance specs. The minimum impedance numbers are where any problems usually arise. My speakers are 87db, 6 ohm nominal, 3 ohm minimum, and require power and current to bring them to life. Although a 50wpc KT88 tube amp might sound fine on them, it wouldn't bring out their best performance.
Contrast/compare 50W tube amps
Any one familiar with these amps,or make recommendations on another.To be used with two speaker systems:Gallo 90db/9 ohms and Open Baffle 90db/6 ohms.THE CONTENDERS:
Quicksilver Triode monos(6c33c-b/50W)
DeHavilland GM-70s
Bat VK-75SE
Atma-Spere M-60 MKIIIs
Trancendant "The Beast" (I know they are 175/W)
I like the tube warmth,but need the extemsion/dynamics.Cabling will most likely be Omega Mikro.
Thanks for looking/responding in advance,Tom
Quicksilver Triode monos(6c33c-b/50W)
DeHavilland GM-70s
Bat VK-75SE
Atma-Spere M-60 MKIIIs
Trancendant "The Beast" (I know they are 175/W)
I like the tube warmth,but need the extemsion/dynamics.Cabling will most likely be Omega Mikro.
Thanks for looking/responding in advance,Tom
- ...
- 25 posts total
- 25 posts total