Mr N- I missed your question concerning interfacing a TacT with an integrated amp. The tact units(either 2.2 or 2.0) are pre-amps/control units/room correction devices and you'd need no other device between your analog line level source(phono pre, CDP, RTR tape, etc.) and your power amp(s). Of course you could also input the digital output of your CD transport directly into the excellent circuitry of the TacT unit and let it oversample and reconstruct your music signal. If you own an integrated amp already: If it has a pre out/main in loop, you would simply bypass the pre-amp section altogether and feed the output of the Tact into the main amp.
Room Correction Hardware options ?
Hi guys
Tried the conventional bass traps, diffusers, etc and none seems to work or remove effectively room nodes in my listening room. Now exploring the possibility of Digital room correction. My options are: Lyngdorf RP1, Tact 2.2 xp and the Accuphase DG48.
Which of these three is the most effective w/o deteriorating the signals ?
Care to share on experiences on these gadgets ?
Regards
Noli
Tried the conventional bass traps, diffusers, etc and none seems to work or remove effectively room nodes in my listening room. Now exploring the possibility of Digital room correction. My options are: Lyngdorf RP1, Tact 2.2 xp and the Accuphase DG48.
Which of these three is the most effective w/o deteriorating the signals ?
Care to share on experiences on these gadgets ?
Regards
Noli
- ...
- 21 posts total
- 21 posts total