2. amps-preamps
  3. 1343157082

Please Recommend a Low Gain Solid State Amp ARC

Hi all,

The amplifier I am using is a McCormack DNA-125, which has 30db of gain. I have an Audio Research SP8 MkII preamplifier. I had Audio Research lower the gain in my SP8 recently, but needless to say, the volume through my Vandersteen 3A Signatures still gets loud in a hurry. I was wondering if someone could please recommend a low gain, solid state Audio Research amplifier that is rated between 100-200 watts per channel? I do not want a tube amplifier, and I do not want to get rid of my precious (SP8 MkII).

Thank you!
distortions
rrog
1,958 posts
 
Since you have already made an attempt at lowering the gain of your SP-8 my guess is your source is where the real problem lies not the amp/preamp combination. If you are using a Theta with 7 volts output or some other digital source with high voltage that is what needs to be corrected.
river251
143 posts
 
Well, I really think the culprit is that SP-8. I'd be willing to forward some funds to help you pay for a new pre. :-)
marakanetz's avatar
marakanetz
5,473 posts
 
lowering gain of ARC is bad idea.
distortions OP
9 posts
 
Hi Guys,

Thank you for your help. I am using a Marantz SA8001 for my source. I believe its analog output level is 2.3V RMS.

Marakanetz,
Why do you think lowering the gain of the SP8 is a bad idea?
bifwynne
2,069 posts
 
You may want to call Calvin at ARC. He might have some practical solutions. I mention in passing that the SP-8 is a bit dated. If you love your amp, may be you should switch out the pre. I am not suggesting that you get rid of the amp and keep the SP-8, but I am mentioning in passing that ARC gear works synergistically well together. If you love the SP-8, consider an ARC amp, even a used one. By the way, have you had ARC go over your SP-8 recently. Old gear oftentimes needs a freshening up, especially the caps. Something to think about.
More to discover