craig_severin
Responses from craig_severin
Move router far from hifi components? I realize this is a conversation from a couple if years ago, however, I just read it for the first time recently and decided to see if some if the advice contained within would help my system and I can say that it most certainly did. My WiFi modem... | |
Need some help soldering Binding posts. There are so many images of improperly soldered Cardas binding posts on the internet that I decided to change my profile image to that of a somewhat correctly soldered Cardas binding post. I say "somewhat" because when I have the time I am going t... | |
Need some help soldering Binding posts. UPDATE: Sonic Craft has recently told me that they always loop the hookup wire through the little hole in the tip of the Cardas binding post before soldering. So, I apologize to those whom I disparaged. However, Sonic Craft still commands that a 2... | |
Need some help soldering Binding posts. "Use PLENTY of HEAT - we use TWO 35W soldering irons when soldering binding posts - and +1 to the comment above - there should first be a very solid electrical connection then apply solder to make it stick."As I mentioned in my initial post per Ca... | |
Need some help soldering Binding posts. "Solder should never be used to glue things together. The connection should be made physically sound first."How do I make a solid connection to a Cardas binding post without using solder as the glue. It cannot be done because there are no set scre... | |
Need some help soldering Binding posts. I realize this is a very old post, but I felt it was my duty to let others know because I had recently searched the internet for answers and this post was as close as I found, but there were still unanswered questions. For those of you who may not... |