scar
Responses from scar
| help me remove noise from my vinyl setup thanks, all. i just cannot get the noise down to a satisfiable level. i looked into SUT but i have heard from some experts that they require cartridges with low impedance, and the 47K of the grado is way too high. so it would mean buying a new low... | |
| help me remove noise from my vinyl setup thanks for your insight. trying another low-output cartridge is not really an option i have, unless i buy one. i have some high-output Grado's and there is less noise.so you think it is the cartridge and not the phono pre-amp? both are grados ;) i... | |
| help me remove noise from my vinyl setup i heard back from Grado that the cartridge "has .4 mv output and an output impedance of 47K."from the very limited knowledge i've so far picked up, it seems that a SUT wouldn't work with that impedance.... | |
| help me remove noise from my vinyl setup yeah the impedance is 2 ohms right? thanks for the link i'll check them out. | |
| help me remove noise from my vinyl setup i have heard from someone else that "The Sonata has an output of 47k ohms and any SUT will also add reflected impedance. The Sonata can only be used with a Head Amp. No SUT will work with it."what should i buy? | |
| help me remove noise from my vinyl setup i am looking through some SUT's around here. i need some clarification on specifications. like load impedance or something.my cartridge says it has "Imput Load 47K" and "Resistance 2".i see some SUT's have selection switches, also. "bypass"? "pass... | |
| help me remove noise from my vinyl setup thanks.can anyone recommend a SUT for my setup? i honestly don't have any experience with them. i'm sure i can pick up a few things by reading various threads around here, but i always appreciate some first-hand recommendation based on my current ... | |
| help me remove noise from my vinyl setup thanks. i've talked this through with grado, and i've even had the pre-amp examined and refurbished by them, so it is operating correctly.a higher output cartridge (like a reference sonata) would not be as detailed as the current statement sonata,... | |
| Technics SL1200: standard overhang gauge or MintLP i have an sl1200 with the upgraded, fluid-damped arm from KABUSA, i think it is the same length as the stock arm. i also am using a different headshell than the technics one. would the mint protractor still pertain to my setup? if so, is there any... | |
| help me remove noise from my vinyl setup hi again. sorry i wasn't clear. the recording i provided a link to *isn't* surface noise. the turntable is turned off, and the arm is at rest. rather, it is is electrical noise. i just mentioned the sound card because that is what i used to make t... |