vitor
Responses from vitor
| B&W DM6 Wadding Hi,i replace the damping in the mids with Visaton lamb wool, and got very good results. I dind't change the woofer damping. I also replace the feets with ones similar to the ATC , for me one off the best results. The low frequencies became must be... | |
| B&W DM6 speakers Hi, i replace the damping in the mids with Visaton lamb wool, and got very good results. I dind't change the woofer damping. I also replace the feets with ones similar to the ATC , for me one off the best results. The low frequencies became must b... | |
| B&W DM6 speakers Himine dm6 is suberb,the close box is fenomenal, changed the internal wiring and capacitors ,spikes in the supports (8mm) for better stability, think that the height of the supports is the best, higher I lose in the highs, in some comparisons with... | |
| Anyone heard of the Dynaudio Crafft?? Idoes any of you try to open the loudspeakers? My dynaudio crafft have the drivers glued to the box. | |
| Review: Revelation Audio Labs Paradise Interconnect Hican you tell me the name of the internal DAC that the Pioneer pd 65 use?Best regards Vitor | |
| Best phono pre amp for Lyra Helikon I have Lyra helikon with Tom Evans the groove, that was the first time i realize the potential of the rest of the sistem, is very good, not flexible, not on the beutiful side, it is a very special phono, it,s all about the truth.Good luck! | |
| any dynaudio crafft information? Eriki also contact Dynaudio, the information they send were simylar to yours.ThanksBest regardsVitor |