willcycle
Responses from willcycle
| Emotiva Repair What problem are you having with it? | |
| Levinson 380S with sub The record outs are only single ended. Levinson does not recommend using the preamp balanced and single ended outputs at the same time (you would un-balance the signal by applying a different load to each phase). | |
| Levinson 380S with sub You could use the record out but it would be a little cumbersome when changing inputs. | |
| Krell KSA 250 slow start board schematics I would hope the unit was recapped. Check the power resistors. | |
| Does Krell still convert KSA 250 into MDA monoblocks I doubt Krell would still have the parts. An MDA model uses a different input board - it is not a bridged amp. I love my KSA-250s. If your amp has not been recapped I would recommend you do so to breathe new life into it. An amp of equivalent ... | |
| Cry for Help! DEAD Mark Levinson 335 If you can solder take the shotgun approach to the board and replace everything. | |
| Outrageous used pricing on older McIntosh When you take inflation into account the residual value is not as high as it seems. | |
| On A Mark Levinson 380 preamp, what does it mean on the display , code e 984 ? software version | |
| Emotiva xpa-2 or xpa-200? I own both and prefer the less forward sounding XPA-200. | |
| Mark levinson 432 This is a classic symptom of a bad connection or solder joint. | |
| Baltimore MD I'll add my thanks to Sang for hosting a fun afternoon talking audio and tweaking his system. I hope we were able to help improve the system for you so you can derive greater musical satisfaction.Will | |
| External DAC for Sony SCD-777ES I use a balanced theta Pro Gen V with Genesis Digital lens, Behringer DEQ 2496 for digital EQ and a Sonic Frontiers Ultrajitterbug. My SCD-777ES is stock. The difference in sound quality without the DEQ (i.e. no digital room correction) is vast an... | |
| Can an ADCOM GFA-5802 be converted to 220V Adcom can give you the details of rewiring the large toroid transformer and setting jumpers for the smaller control transformer as well as fuse replacement. I changed my amp from 220V to 120V. |