2. speakers
  3. 1356681513

2 REL Strata Subs and Mono amps

Hi all. Need a quick bit of advice.
Running 2 REL Strata IIi subs, each connected to its' own mono bloc amp.
Runnung Merlin TSM's.
What is the correct way to wire the REL high level cable with neutric connector?

The REL cable has a red, yellow and black wire.
Do BOTH the red and yellow wires get connected to the RED speaker output on the amp, with the black wired to the Black connectors on the amp?

Thanks
jdolgin
vladimir
346 posts
 
Zormi, I forgot to add that you should copy the grounding scheme of the pag. 12 (top) example for the (bottom) example, of course. I think the chassis screw grounding will work for Krells, but ask them first just to make sure.
zormi
103 posts
 
Very insightful thread, for me at least.. Grateful to all of you.

Happy New Year to all, lots of music!
hifigeek1
770 posts
 
I contacted Audio Research only to be told that someone had already called to get the info. The bottom line is, use the 4 ohm tap as signal and chassis ground are isolated by 10ohms. That should be sufficient. That's the info I received from ARC.
More to discover