Amp for Dali Hellicon 400 mk2


any suggestions for powering my dali speakers...so far..have used a nad 218 and an ati 1506..neither of which made them sound overly inspirational...
dan001
Hi Dcstep, I am currently using a Gamut DI150 with Helicon 800 mk2, but have heard the Helicon 400 bass sing deeply on other amps like Gryphon, Ayre, MF KW, and even NAD M3, amongst others. They didnt seem as fussy to me as other speakers (i know some ppl disagree), but obviously clean power helps a lot. I owned them for maybe 18 months and I enjoyed them best at around 350mm from the rear wall. Choose a cable that doesnt clip or mush the bass -- that seems to be important. The bass isnt razor tight/sharp like some speakers, but I still found it to be nicely defined and richly musical, which creates some real magic when combined with the ultra transparent mid and airy top. They must be run in properly. Rgds
I tried them with Rowland, Primare and Conrad Johnson with either Cardas Golden Reference or Analysis Plus Solo Crystal Oval 8, so I don't think there was any problem there. I heard depth but no character. I don't understand how them room did this with the Dali, but not other speakers, but I'll try again. If Dali can't show them at their best, no one can.

Dave
Dave, I can comment on a few things: I would say Primare needs a completely different sort of speaker. I once tried it with Dynaudio and it was terribly flat and lifeless. I do know someone who couldnt make the Primare work well with Helicons, and is using Martin Logans. I do believe Primare make great amps, but perhaps they have a strong character that suits certain speakers. I also think Cardas is a complete mismatch with Helicons from personal experience. I tried their speaker wire when I owned the Helicon 400, and found it took the life away from the speaker, and also made the bass sound sluggish. Havent heard Rowland, Conrad Johnson, or Analysis Plus with Helicons. I am nurturing a theory that Helicons would sound a little better with solid state rather than tube vs the Euphonia for e.g. because of their warmth, but I might be completely wrong.
Mike, you're absolutely right about the Primare, at least the 100 wpc unit that I heard. With the Primare the bass was flabby and bloated. The amp clearly couldn't damp the mid and bass drivers.

The Rowland Continuum 500 and the C-J CA200 did a fine job of controlling the bass, but didn't bring out any richness in the bass. As you say, the bass was lifeless. What cable are you using?

One thing is clear, the 400 needs at least 200 watts and a high effective damping capacity. Many tube units are unlikely to provide the damping and control needed.

My guess is that Dali will have these kinks worked out in their RMAF suite. We shall see...

Dave
the helicon mk2 400 need alot of clean power to control the bass. i am using them with mcintosh 501. ss does work better then tube with the helicon unless you are in the upper price range of a tube amp. I also noticed that the helicon are a very fussy speaker, you need to place them just right, and yes they do need alot of break in. i chose to sell mine and went a diffent rout with totem winds. the helicons will reviel a poor amp and or interconnects.