AT440mla, ortofon 2m red, or JICO SAS tip for mx97

I must admit to being somewhat tepid about the JICO SAS on my V15Vmr. I don't think that it is up to the sound quality of the original stylus on my other V15Vmr. That said, I found the 440 to be very bright and the Red has a bonded stylus, and that would put both of them out for me.

What concerns me is the SAS is a radical cut stylus that requires exacting VTA/SRA. I don't think that the Fisher will get you there. So my suggestion is to get the regular JICO elliptical stylus for the M97xE, or a Shure M97xE replacement, by process of elimination.

So I am going with the SAS... I'm gonna roll the dice with LPGear since JICO in japan is all backordered... Hopefully will be here in time for christmas break so that I can break in before I go back to work. I will use my handy protractor to get the baerwald alignment all dialed in. I have some old vinyl and some new. Some horrific pressings, some 180 gram, and some hot stampers. I will report back my findings over the stock stylus for all to read. I am starting to understand why people have multiple headshells and multiple tonearms.. It's like having multiple monitors on a computer... I will also transcribe some of the vinyl I had already done with the elliptical stylus to forensically analyze them. Thanks for all the insight...

Ben

I had my vta set with some custom machined shims for the headshell with the old stylus... (nice to have a friend who owns a machine shop) I realigned it when my custom made janus mat replaced the stock mat on the table. If realignment is needed i can get more shims made. This is as far as i can go with my current setup to get precise VTA adjustments... I will say the thin shims did make a lot of difference with the old stylus and that I should be shot for damaging it. However, I will take this into consideration and pay close attention to detail when doing so.

Viridian has expressed his dislike for the Jico on other forums and I totally respect that. It's worth noting, however, that a vast majority (in fact, I'd say he's the only one to the contrary) have noted significant improvement with the Jico SAS styli.

The Fisher MT-6330 appears to be fairly flexible in looking at pics online, you should be fine.

Look forward to hearing your impressions. FYI - Jico always shows the SAS backordered but they've always shipped within a week with all my orders.

Much appreciated... I know my low budget setup is no LINN or even a technics 1200 for that fact... But I have had good luck out of the fisher through more manual means... And best of all the price was right---FREE LOL... Beats my old technics sl-bd22 p mounter with a grado blue hands down... I am still looking forward to my stylus and I am pretty sure I will have good results even if the setup is a bit fiddly... Thanks for the vote of confidence Vinyladdict.