Deep Cleaning Records With Steam?

I should add that I was using the long neck attachment to avoid tipping the steamer more than 45 degrees, as is cautioned against in the manual.

Tvad,

I've got the Perfection and had some sputtering with mine. I came upon a technique that may help. I haven't done it enough times to be sure that it works. Anyway, try this and see if it cuts down on the sputtering. I use the extension and the right angle attachment.

Pick up the steamer but before hitting trigger, tilt it back toward the handle a little and give it a couple of taps with your free hand. Try to keep it tilted back while you pull the trigger. I think I get much less sputter this way, but again I'm not 100% sure.

I'll try it. Thanks.

The sputtering may be caused by the tip getting clogged on occasion. To clear I pass a piece of 14g wire through it and back to a nice steady steam stream. BTW this is a great way to clean records, mine have never been cleaner.
My system for cleaning-
I have an old player that I use- put the record on and give a 2-3 second blast from 4-5" with the record turning. Then I apply a few drops of my home brew and cover the surface of record with a 1" Purdy paint brush gently spreading. I then give another 2-3 second blast. Put the brakes on the record and use my modified velvet covered vacuum wand to remove all liquid and matter leaving a gorgeous better than new record.
Thanks to Crem1 and all the others for showing me how to clean records like a pro without buying a $500 plus machine. This is my meditation prior to playing and I take pride in my cleaning that I wouldn't get by throwing them in a machine and waiting.

another reason for sputtering is overfilling the boiling chamber. There is a measuring cup that will help with that. I also use the long spout with the downward pointing tip. also agree you should empty the unused water each time. Even ultra pure will have some solids if you continually add water without occasionally purging