DENON DL-304. Is it the bargain sound or not?


Hello to everyone!
I leave in Greece and it is the first time to write as a member of Audiogon.
First of all I would like to clarify that I am glad to join with your great company!
I like the “analog” site of music, so I have a couple of questions to do.

My current system is:Preamplifier: Onkyo P-304, Power Amplifier: Onkyo M-504, Loudspeakers: Scandyna Blueroom – Minipods, Subwoofer: Blueroom Bass Station, Turntable: Technics SL-1210 MK2, Cartridge: Denon DL-304. The problem is that the sound is very “bright” when I play music with my turntable. I mean that in many discs, the high frequencies are more aggressive than they should be.
delamostre1
I get great results on my SL1210M5G with an Audio Technica AT150MLX. I use KAB's fluid damper and LP Gear's ZuPreme headshell. It's very extended and linear, and extracts more detail from the groove than I ever thought possible at this price. Pretty easy load on a MM preamp if you can keep the capacitance between 100 and 200 pF, preferably (IME) 150.
Fleib & Johnnyb53, thanks both of you for your interesting and for your answers.
I must test some of these cartridges in my system, to have a conclusion. Most of all I am considering to test the Grado, Clearaudio & AT.

About the solution of vintage carts that Fleib mentioned, I think that is a better solution to buy one of these. The older tech of those MM carts may be better than the newest ones. I suppose that a Shure V15 or a Technics EPC-100C Mk3 are very nice solutions.
The point is, as you mention, the condition of the needle. May be the better way to have a new needle is Jico with SAS technology.
I have a Shure M91ED cartridge with an original NOS needle, that I bought it a week ago. The sound compared to Denon DL-160, has some "points".
This cart plays better in low & middle frequencies, but is disappointing at highs. Do you think is a good start, to buy a SAS replacement needle from Jico for M91ED? Is this a better solution, or I must buy a new one from those you mentioned, to have better results from the combination of Shure M91ED – Jico SAS?
The biggest mistake for those loading a cartridge down is to rely on using resistors to load the cart but does not account for the gain. The transformed impedance of the SUT's affects the gain needed for the cartridge to match well. That is the reason why said 1:36 SUT!!! if you have a 1:10(14 db) SUT and you keep on lowering the load down by means of resistors, you are in for a very big disappointment, guaranteed. You can look at it electrically thru analyzing a voltage divider circuit behaving on AC signal. Realize that as soon as the load of the cart equals to that of it's internal impedance, the output it can generate is halved!

But of course, you do not have to worry about that now.
Many threads mention a thick slab of butcher block wood to help the sound of the table.

I was wondering if a slab of solid granite (like a leftover from a kitch counter project) would do the trick?

Or is there something inherently wrong with stone/granite that precludes it from reducing vibration and providing better damping?