Dunlavy SC4 Speakers


Does anyone know what the value of a used set of Dunlavy SC4 speakers would be? These are the original SC4's early run I believe. The reason for the question is that I have a line on a set and I'm willing to pay fair market value which often is determined by a speakers popularity and not actual worth. I'm trying to determine a base line price with the seller without out getting into these are the best speakers ever made and that makes them worth a million bucks!

Thanks!
2channeljunkie
If you move back to about 1' from the wall behind the listening position/or until your about 12' from the speakers (trial & error), and have the speakers backs about 2-3' from the wall behind them, you should have better driver integration and smoother bass response.
^If you have toe in dialed right, you might want to have the base of the triangle a bit larger than the legs.
2cj, as I said, lots of different advice but how much fits your system?

I think Unsound has offered good comments, up until he suggested sitting 1' out from the back wall, at least relative to "smoother bass response".

So let me suggest this. If you have a test CD or one with repetitive bass information, put that on repeat and set your volume at or near the maximum level you would listen to. Then move around the room, listening from a wide variety of locations. I'll bet whenever you are within 2' or so of any wall you will hear a boost in bass. The greatest amount should happen in corners but anywhere close to a wall may be more than further out into the room.

Then it will be up to you to decide if the boosted bass sounds natural and desirable to you. If it does, you can increase the apparent bass output from your SC-IVs with your chair/sofa against the wall and your head a foot or so away. But I have my doubts that will be the smoothest bass response.

Also, the problem with absorptive materials for bass frequencies is that they must be very thick to be effective. The typical 1-3" absorption will not help with frequencies below 180 Hz which is the traditional range for bass. There is lots of information online covering this if you search a little.

As with so much in life, balance should be your key.
FWIW, the absorptive room treatment I was suggesting was not intended for bass frequencies, and the recommendations and reasons for those recommendations were given to me personally by John Dunlavy.
Mikel,
Congratulations on your purchase of the Dunlavy speakers. I see from your thread that you are very responsive to "Unsound" and other members that give you advice and info to help you out with your new speakers. That is wonderful, but I hope you understand that I would also like to correctly set up the Vandersteen speakers that I purchased from you. For this I need the stands, which you promised to send out last Saturday/Monday and have yet to ship to me. For some reason, you are not responding to my inquiring emails, and I don't understand why you would treat a fellow Audiogon audio enthusiast disrespectfully. Didn't I pay you very promptly ??? There is not much of a "community" here if there is little to no communication. Can we please conclude this transaction in a timely manner ?