Well so far from what I have seen is that my dedicated circuits are both on the same side of the panel as the furnace is. I do have a gas furnace so the breaker for the furnace is 110. As a last resort I can look into putting the furnace breaker on the other side of the panel. (Is this what you were referring to Nosnhoj???)
Also one other thing to note is that my ground bars in my breaker are full and there is more than one ground in each one, including both dedicated circuits for my audio setup.
I have also switched my amps to the other dedicated circuit that is installed, and now the clicking noise the furnace starting is now coming through the opposite speaker.
Commcat,
So what if I use a 2 prong adapter and I find out that the problem is gone then how do I really fix this problem as I do not want to permanently use one of these adapters.
Also one other thing to note is that my ground bars in my breaker are full and there is more than one ground in each one, including both dedicated circuits for my audio setup.
I have also switched my amps to the other dedicated circuit that is installed, and now the clicking noise the furnace starting is now coming through the opposite speaker.
Commcat,
So what if I use a 2 prong adapter and I find out that the problem is gone then how do I really fix this problem as I do not want to permanently use one of these adapters.