Input/Output line level transformers for digital glare


I have been told that putting "iron" in the line output from the preamp to amp makes for a wonderfull change in digital glare issues on a digital media system

How do you do this? With single ended ended rca analog input/ output?

it supposedly does not affect frequency range nor dynamics?


Jeff




frozentundra
Gents;

thanks for for all the info on the options 

I still notice all the outboard Dac's, good ones, I think 
still have output transformers vs other methods

i also see the transformer guys;  lyndall & Jensen advertise the output transformers as smoothing of digitis?

jeff

A few  solutions for curing digital glare:
- an Audio Magic Super Fuse in the preamp - works wonders.
- balanced power conditioner for source components.
- beefy copper power cords for digital sources - avoid silver plated copper.
I still notice all the outboard Dac's, good ones, I think
still have output transformers vs other methods

i also see the transformer guys;  lyndall & Jensen advertise the output transformers as smoothing of digitis?
Some do some don't.

A good transformer will have bandwidth well past 20KHz which means its not going to do a whole lot of smoothing. In fact if not loaded correctly it can also ring (distort) which will make it sound brighter.

Lyndahl and Jensen both make excellent transformers. If used carefully they can be of some benefit, for example they can be used to go balanced even if the output of the DAC is single-ended. You **might** get some sonic advantage from doing that as if balanced line is executed correctly, the result is that the interconnect cable will cease to have an effect on the sound of the system. If it was contributing brightness prior, then this is an advantage. They can also isolate grounds; if you have a ground loop (which can allow noise in the ground to get amplified) then the ground isolation can be help out as well.
If you are willing to spend the money, get them from Jensen. They also have isolation boxes which include two transformers, and all the in and outputs you need.  By all means try it.
Did we talk about what speakers you are using though? Maybe the real problem you are having is an exaggerated top octave or two. But over the past 4 years specifically a lot of really good sounding DAC's have come onto the scene, such as Mytek, Schiit. Portables such as the Fiio, Pono and the UFO DSD DAC also sound really great.

I think you said you tried the Schiit and you found it "glare"ing. If that's true, I don't think it's the DACs you are listening to though. I find the Schiit a bit on the warm side.

Best,

Erik