Installation Instructions??

Lewm- What a good idea. Tweezers for sure. As for the order, I have always mounted the cart first, then connected the clips. BTW, if you want nerve-racking, try doing this with a nude canteliver cart like the benz or on a tt with no arm rest like the schroder. Luckily, I did not have both at the same time!!!

Another vote for tweezers. I usually mount the cart on the arm LOOSELY, then attach the clips, then tighten the cart screws, checking the cart alignment with your protractor of choice. before the final tightening. All. Very. Carefully.

A handy hint. Roll up some Mortite (plumber's putting) or a Blu-Tack equivalent so you have a thin cylinder -- something you can twirl between thumb and forefinger -- that's about an inch long and use it to hold the nut and/or tighten the screw before you use a screwdriver for the final tightening. Good luck, Dave

Use a hemostat (electronic/medical/fishing supply places) and clamp onto the wire crimp using the first setting(click). Sometimes it is hard to hold onto the connector and push at the same time,

Thanks all... I feel like I'm sitting on death row awaiting the final outcome. We'll see..

Stringreen, we must have scared you to death. It's basically a piece of cake, assuming we've imbued you sufficiently with the need to go slowly and carefully. Hell, I can do it in my sleep and I'm 78. Dave