Magnepan 3a's with two bridged krell 1000wpc 8ohms

You can get comparable amps for way less, but if you own them go for it! I use Wyred4Sound SX 500s on my Maggie 3.5R bass panels. Not sure if 1000 watts would be too much. I am using a PS Audio GCA 250 on the ribbons, so far so good, but it scares me on powerful passages when I see the clipping lights come on.

I have recently used two Spectron M III SE's (with V-Cap options on the main boards) in balanced mode to drive my MG 20Rs, which in this configuration, according to Spectron, is pushing greater that 2000 (some claim 3000)watts per side, with great results and no problems. It really wakes them up. They gain speed, dynamics, articlation and definitely a greater sense of ease with the greater power and current.

Thank you for the answers.

It will work fine. I would say to be a little careful as you may start to pop the fuses in the Maggie if you push too far.

I found with the older Magnepans that more power usually meant more volume before the bass panel started to rattle and hit the magnets. But you will reach the poor old maggies volume limit quickly.