Need help with a Tube PREAMP.

A used McIntosh C220 might stretch your budget, but if you shop carefully, could be obtained. It has balanced and unbalanced outputs, and has no issues driving long RCA runs into my SS amp with 10K input impedance. Like all recent McIntosh preamps, it is designed to drive either tube or SS amps. My C-J PV11 that was replaced with the McIntosh, not so much.

I use an older BAT VK 30 with a new Bryston 4B SST2. The 2 work really well together. I use to use the BAT with an older Bryston 4B. The Bat preamp utilizes 6 - 6922/6dj9/E88cc tubes. I am currently using Mullard E88cc tubes series 2493.A beautiful combo. You might even be able to find one of these preamps for a good deal or even a more updated version.

Hello Everyone ...thanks for the Responses....I came across a great deal on a used MODWRIGHT SWL 9.0 SIG ED.So I bought it. When Ive tinkered with it a while I will repost how it went. thanks...agian.

Matt M

Matt- The MW is a value leader IMO and about as ss-like as you will find in tube line stage. Neutral in my system and was not embarrassed by the much more expensive Doshi Alaap that is covered for while the Doshi was in for service. Enjoy.

This one has the Upgrades too ..Tube 5AR4 rectifier and MW/caps. Should help give it a little more tube sound. I wont get the unit til the 26th..sooo I'm biting my finger nails. I havent had anything close to a good sounding pre amp in a long time.