Power Strips

You should consider the purchase of a Monster Cable HTS 2000 power center. It is a power conditioner/surge protector which retails at about $200. You can buy it cheaper on ebay and you may be able to get it here also. There are others that may be better but this one gets high marks at a good price point. Get it from an authorized dealer if the $100,000 conected equipment warranty is important to you. You will see immediate improvement on video. Audio will take a few days to break in.

You might like using a "power conditioner." A good one should (1) protect your equipment from power spikes (e.g., when a falling tree branch severs the line to your house, a power spike can occur and damage your equipment), (2) isolate your components from each other so there is no potential for interaction (e.g., digital devices may screw up your analog sound), and (3) reduce noise riding in on the power current (e.g., choppy noise from vacuum cleaners).

I have a regular power strip from Radio Shack that protects one of my systems, but doesn't isolate or condition the power. I don't do a lot of critical listening on this system. I use a Tice Signature Power Block IIIc HP for my main system. It does all three. I like it because it has a lot of outlets, it comes with two power cords that can plug into two different outlets (rather than pulling all its juice out of just one plug/outlet), it is rated to handle all the power my rig requires (some power conditioners have circuitry that maxes out above a certain wattage), and it's built like a tank. There are plenty of other good power conditioners employing a variety of technologies to choose from. Reviewers and aficiondos claim to have heard differences between them; perhaps you will, too. The dirtier your wall power is, the more you might benefit. Happy listening!

I had the same problem when I put together a HT. Rather than use a power strip I cut out some of the gyproc wall directly beside the existing plug and ganged together two more electrical boxes. You end up with six outlets at a cost of $10. All you need is two more electrical boxes, two more duplex plugs, a little bit of wire, and a 6-outlet face plate. Took me about 2 hours all told. This may not be considered ideal by some folks, but to me the HT set up isn't about high-fidelity so expensive power conditioners, quality strips, or dedicated electrical circuits aren't necessary IMHO. Save a few bucks, and spend the windfall on records.

As with Jeffloistarca, or make your own power strip. (unless you are in the market for, or have the bucks for a audio grade unit). Avoid surge protectors, unless true audio grade. Buy some Electrical cable Sheilded if you wish, as many duplex boxes as you need, and hospital grade outlets... wire it together and voila' a high grade power strip for a fraction of the price.

Chang Lightspeed offers affordable *quality* line conditioners with multiple outlets & integral surge protection.