Purepower APS a reliable product?


To those who are considering buying a regenerating power supply, I want to share with you my experience. I bought one a Purepower 1050i back in mid 2010. It worked good and provided a dark and quiet background for my system. I was happy with the unit until about 11 months ago. It just failed one day when I returned home from work. It was off itself without any display. I tried to turn it on but a message came up as short circuit and some smoke came out from inside. I can smell it too.

I contacted Purepoweraps in Canada for repair and finally agreed to send the two boards back. Sending the whole equipment is too expensive. It then went quiet for nearly three months and no one ever return to my emails. I finally called them despite i am in a 10 hours different time zone. I was told they were waiting for parts and should be fixed the following week. After more than 5 months, I finally got the two boards back. I plugged them in correctly but not able to turn it on. I contacted purepower again and they ask me to check connections, all correct. Disconnect the battery and all other sorts of means. All failed to turn it on. After I chased a few more emails, no more reply and went quiet again. Despite chasing for another few months, I got no feedback and answer. I finally tried the local dealer and they told me they dropped the line and now selling PS Audio only. There were technical problems but he was not willing to provide more details.

I tried another dealer in another country but I was told they got no parts and not able to repair for me.

Early this year, Purepower launched a new line of products. I discussed with the Marketing Manager of Purepower and suggested a trade in offer to get the new one. I was promised with a proposal and it never comes up.

It is a good product. But not reliable. More important, the technical support is not available at all. No customer services.

If you consider buying one, think carefully. Good luck.

The purpose is purely to share the experience. I may be the unluckly one or I am just one of a couple of dozen or a couple of hundred unlucky one. May be you can share your experience.
aressiu
Well, Brf I'd agree, IF it wasn't for other similar threads, and that still doesn't account for the delays and particularly the lack of communication on PurePower's part.
I bought 2 PurePower 1050s from the local dealer a while back. Both are still running so fingers crossed.
Aressiu,

exactly the same happened to my 700 unit. I switched it on, heard a bang. After that it smelled like burned electronics. A few times Damian responded to my mails. They don't make the 700 boards anymore and he is looking for a solution. called them once but Damian was not available.
Will have to give them a few more calls I guess. the 1050 boards can be made to fit inside the 700 unit. question is do they have spare boards??
2 years ago the unit failed after a thunder storm (not the units fault). After a long wait I got new boards and unit was working fine ever since. They told me they get the boards from a manufacturer in Taiwan.
Just to keep this discussion alive as PP has been actively marketing their new products lately. I have the PP2000 with the same problem. After discussing with Damian back in July 2012 on the phone, he issued an RMA for me to send the unit back for repair. It's been over 18 months. Whenever I called and e-mailed, if I get a response, either Damian or his father Richard would give me a bogus story that my unit is next on the list, they are upgrading the inside to a newer model, they are pulling a unit off the production line to send to me, etc. I have requested numerous times for them to send the unit back to me as-is at my expense, or allow me to trade it in for a new unit with cash but to no avail.

I've just filed a complaint with the Ontario Consumer Agency, but I am not hopeful that it will get me anywhere. Buyer beware.

FrankC
That is really a shame that this company has such a long history of this.
I guess though with a name like Damian that should tell us something...