QUAD ESL 2905 / 2805

There are two comments about failures of the new Quad speakers on Audioreview.com Is that where you have seen/heard of the reliability issues, or from some other source?

Quad dealer Sound Hounds in Victoria, BC, reports no reliability issues with these from their customers. Then again... they sell A LOT more AN-Es than ESLs...

Has anyone had success pairing 18wpc SETs with 2805s in a small room at moderate volume levels?? Thinking of trying that...

I loved my 2805s and used a McIntosh 275 (75wpc) and McIntosh C2300 preamp. The match was great with plenty of power in my 12 X 24 X 8 room. Over the years I used other lower power tube amps which also worked well.

But in the two years I owned them (bought them new), I had them in for repair 3 times, even though I never drove them beyond 80 - 85 db. It was not panel failure, which is common from over-driving them, but electronics failures. Poor soldering, shoddy workmanship, etc. It is a real shame, because they are great sounding speakers. The warranty is only one year.

The dealer I bought them from has since dropped the line due to so many reliability issues with both the 2805 and 2905. I've since moved on to other electrostatic speakers with a much better reliability record.

If I was to do Quads again, I would get some rebuilt 63's or maybe even 57's, from one of the reliable companies here in the US that does the rebuilds.

Dave

FWIW, have decided to drop the idea of the QUAD ESLs ... and go the way of the Advantgrade Duos ...... maybe this will even render my bat vk55 w more than sufficient power ...

While I really appreciate this thread from the standpoint of information, I'm more than a bit disheartened to read it.

The reason being, I'm getting together with some audio friends tomorrow to visit a couple of local dealerships, with my intent being to audition the 2805 and/or 2905. For the record, the previous two generations did not suit my tastes, and I've not as yet had the opportunity to hear the ESL57. I have no idea if this current iteration will work for me, as I've yet to hear them, but I'm more than curious at this point. I was going in with a completely open mind and the feeling that if they turned out to be the answer, I'd most likely move forward with a purchase. However, after reading this, even if I fell in love with them, I have truly serious reservations.

At any rate, having an intimate knowledge of some Chinese audio components, I'm not at all surprised regarding the issues regarding reliability and workmanship. Sadly, most of us see the things they do well (such as component weight and cosmetics - chassis, paint, etc.) and mistake that for solid engineering and build quality. I've learned the hard way the two categories are not at all intertwined.